Maintenance and service 12.4 Installing and removing hardware components
Installing a memory module
How to install a memory module
1Open the device.
2Note the recess and polarity reversal protection on the connector side of the memory module.
3Push the module carefully into the slot until the interlocks engage
4Close the device
Removing a memory module
How to remove a memory module
1Open the device.
2Open the left and right interlocks
3Pull the memory module out of the slot
4 Close the device
Displaying the memory configuration
A new memory module is automatically detected. The allocation of the ”base memory and extended memory” is displayed when you switch on the device.
SIMATIC Panel PC 877 | |
Operating instructions, Release 07/2006, |
