Siemens PANEL PC 877 operating instructions Switch on the device, Self Test

Commissioning

8.2 Switch on the device

8.2Switch on the device

Procedure

1.Plug the power plug of the supplied power supply cable in the AC/DC power supply connector of the computer unit.

2.Lock the power plug in place.

3.Plug the power supply cable of the computer unit into a socket with a grounded protective conductor.

4.Switch on the computer unit at the power switch.

The "POWER" LED will light up. The device starts up and boots.

Self Test

After connection to the power supply, the device performs a self test. During the self test, the message "Press F2 to enter SETUP" appears briefly.

When the self-test is finished, the operating system will be loaded.

8-2	SIMATIC Panel PC 877
	Operating instructions, Release 07/2006, A5E00877780-01