Trouble check

Symptom

Cause and/or Corrective Actions

Recording stops in a few seconds.

• The START/STOP MODE switch is set to 5SEC or

 

.

 

mSet it to . (p. 19)

 

 

 

 

The cassette cannot be removed from

• The battery is dead.

the holder.

mUse a charged battery pack or the AC power adaptor. (p. 9,

 

29)

 

 

 

 

{and 6 indicators flash and no • Moisture condensation has occurred.

function except for cassette ejection

mRemove the cassette and leave the camcorder for at least 1

works.

hour. (p. 82)

The date or time indicator is flashing. • You pressed DATE and TIME together for more than 2 seconds.

mThe camcorder is not malfunctioning. You may start recording. Flashing will stop soon.

The lithium battery is weak or dead.

mReplace the lithium battery with a new one. (p. 72)

The tape does not move when a

• The POWER switch is set to CAMERA or OFF.

video control button is pressed.

mSet it to VTR/PLAYER.

 

• The tape has run out.

 

mRewind the tape or use a new one. (p. 26)

The Steady Shot function does not

• STEADY SHOT is set to OFF.

activate. (CCD-TR730E/TR840E

mSet STEADY SHOT to ON. (p. 68)

only)

• The Steady Shot function does not work when the wide mode

 

is set to 16:9 FULL.

The autofocusing function does not

• FOCUS is set to MANUAL.

work. (CCD-TR511E/TR512E/

mSet it to AUTO. (p. 57)

TR730E/TR840E only)

• Shooting conditions are not suitable for autofocus.

 

mSet FOCUS to MANUAL to focus manually. (p. 57)

Additional information / Дîïîëíèòåëüíàя

The fader function does not work. (CCD-TR511E/TR512E/TR730E/ TR840E only)

The START/STOP MODE switch is set to 5SEC or . mSet it to . (p. 19)

A title is displayed.

mStop superimposing the title. (p. 62)

The DIGITAL EFFECT function is working (CCD-TR730E only).

mCancel it.

èíôîðìàöèя

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 1 or 2 in

heard when playing back a tape.

the menu system.

(CCD-TR730E/TR840E only)

mSet to STEREO in the menu system. (p. 32)

 

 

Excessive high-pitched sound is

• The picture has been recorded with WIND set to ON in the

heard. (CCD-TR730E/TR840E only)

menu system.

 

mWhen there is no wind, set it to OFF. (p. 32)

The date or time indicator

• Reset the date and time. (p. 74)

disappears.

 

 

 

 

(to be continued)

89

Page 89
Image 89
Sony CCD-TR311E, CCD-TR511E, CCD-TR512E, CCD-TR730E, CCD-TR840E Trouble check, MSet Focus to Manual to focus manually. p