PHardPause:To insert a hard pause.

T2-secPause:To insert a two-second pause.

Answering Calls

Toansweranincomingcall:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press to answer an incoming call. (Depending on your phone's settings, you may also answer incoming calls by opening the phone or by pressing any number key. See “ Call Answer Mode” on page 59 for more information.)

Your phone notifies you of incoming calls in the following ways:

The phone rings or vibrates.

The indicator light flashes.

The backlight illuminates.

The screen displays an incoming call message.

If the incoming call is from a number stored in your Contacts, the entry's name is displayed. The caller's phone number may also be displayed, if available.

If Call Answer is set to , the following options are also displayed.To select an option, press the corresponding softkey button.

Press Mute () to mute the call voice.

Press twice to send the call to your voicemail box.

Note: When your phone is off, incoming calls go directly to voicemail.

Phone Basics

Section 2A: Your Phone-The Basics

21

Page 31
Image 31
UTStarcom PPLS-7075 manual Answering Calls, Toansweranincomingcall