ContentsIndex
74
TESTING A PEN
1.While observing the POINTING DEVICE INFO column, bring your pen within 5 mm (0.2 inch) of the display screen. A value for PROXIMITY, the DEVICE NAME, DEVICE TYPE, and a DEVICE S/N (serial number) should be displayed. Be sure to select the Cintiq unit you are testing from the TABLET INFO column.
2.Move your tool along the pen display screen surface. The X and Y DATA values should change to reflect the tool position.
3.Test your pen switches. The Cintiq status LED should light blue each time you click with the tool tip, press the side switch, or press the tool eraser to the display screen.
•Press on the display screen surface with the tool tip. The SWITCHES state and PRESSURE value should change. PRESSURE should change from approximately 0% with no pressure applied to approximately 100% when full pressure is applied.
•Next, press the side switch without pressing the tip to the tablet. The SWITCHES state should change. For the Grip Pen, do this for both positions of the switch.
Pen | Tip = 1 |
| Side switch (lower position) = 2 |
| Side switch (upper position) = 3 |
| Eraser = 1 |
|
|
Airbrush | Tip = 1 |
| Side switch = 2 |
| Eraser = 1 |
•Press the eraser to the display screen. The SWITCHES state and PRESSURE value should change.
PRESSURE should change from approximately 0% with no pressure applied to approximately 100% when full pressure is applied.
•For the optional Airbrush, move the fingerwheel forward. The WHEEL value should decrease to a value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel backward. The WHEEL value should increase to approximately 1000 when the fingerwheel is all the way back.
4.Test tilt for the
5.Test the tilt for the
6.For the optional Art Pen, test the rotation feature by placing the pen tip on the display screen surface and slowing rotating the pen on its axis. The ROTATION value should change as you rotate the pen.
7.When you are done, click on the CLOSE button to exit the dialog box.
ContentsIndex
74
