ContentsIndex

90

REPLACING THE PEN NIB

The pen nib (tip) will wear with normal use. Excessive pressure will cause it to wear more quickly. Replace the nib when it gets too short or develops a flat point.

1.Unscrew the pen stand base to access the nib removal tool and replacement nibs.

Nib removal tool

Replacement nibs

10 standard nibs

2.Clasp the old nib and pull it straight out of the pen. Use the nib removal tool, pair of tweezers, needle-nosed pliers, or similar instrument.

3.Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.

Nib

Warning

Replace when 1 mm (0.04 inch) or less.

Choking hazard. Prevent children from swallowing the pen nib or side switch. The pen nib or side switch may accidentally be pulled out if children are biting on them.

For replacement parts, see ordering parts and accessories.

Important: When not in use, place the pen in the pen stand or lay it flat on your desk. When the optional Airbrush is not in use, lay it flat on your desk. To maintain the sensitivity of your input tools, do not store them in a container where they will rest on their tip or eraser. Improper storage may damage the pen tip pressure sensor(s).

ContentsIndex

90

Page 90
Image 90
Wacom DTK-2400 user manual Replacing the PEN NIB