Commands and Queries Reference | Categories |
Status
Reporting
Commands
and Queries
Synch.
Commands
and Queries
*CLS | clears all Event Status Registers. |
*ESE | assign new value to the Standard Event Status Enable Register. |
*ESE? | return the value of the Standard Event Status Enable Register. |
*ESR? | return the value of the Standard Event Status Register. |
*IST? | return the current value of the Individual Status bit as defined by IEEE |
| 488.1. |
*PRE | assign new value to the Parallel Poll Enable Register. |
*PRE? | return the value of the Parallel Poll Enable Register. |
*PSC | controls whether or not the XMP 2600 will clear all the Event Enable |
| Registers and the 488.2 SRQ and Parallel Poll Enable Registers at Power |
| On. |
*PSC? | return the value of the Power On Status Clear Enable Flag. |
*SRE | assign new value to the Service Request Enable Register |
*SRE? | return the value of the Service Request Enable Register. |
*STB? | return the value of the Status Byte Register. |
CALDT? | return the Calibration Date of a Power Module. |
CESE | assign new value to the Channels Event Status Enable Register. |
CESE? | return the value of the Channels Event Status Enable Register. |
CMASK | program the positive and negative edge masks of the Events Filter |
| Mechanism. |
CMASK? | queries the value of the positive and negative edge masks of the Events |
| Filter Mechanism. |
CONF? | initiates a |
CSTS? | return the Power Module Status Structure data. |
ERR? | return the last known Error Code of the XMP 2600 main controller. |
ERR? | return the last know Power Module error code. |
OPT? | return the Options Byte of the Power Module. |
PEE | assign new value to the Primary Event Status Enable Register. |
PEE? | return the value of the Primary Event Status Enable Register. |
PER? | return the value of the Primary Event Status Register. |
PSR? | return the value of the Primary Status Register. |
SRQS? | return the Power Modules Summary Register. |
*OPC | causes the XMP 2600 to suspend further parsing of commands and |
| queries until all pending operations have finished. Then, the Operation |
| Complete (opc) event bit of the Standard Event Status Register will be |
| set. |
*OPC? | causes the XMP 2600 to suspend command parsing until all pending |
| operations have been finished. Then, the XMP 2600 response to the |
| Query with: “1”. |
*WAI | prevent the XMP 2600 from parsing any further commands or queries |
| until all pending operations have finished. |
XMP 2600 Programming Manual rev. 1.1 | 39 |
