Commands and Queries Reference |
| Alphabetical reference | |
*ESR? | return the value | of the Standard Event Status Register. The value | |
| returned is a decimal number in the range 0 to 255 representing the | ||
| bits of the Register. The register is cleared. <rqs> and <ist> are re- | ||
| calculated. |
|
|
| Syntax | *ESE? |
|
| Parameters | none |
|
| Category | Status | Type: Sequential |
*IDN? | return a string identifying the XMP | 2600. The returned string is: | |
| ‘TESTORNICS,TESTORN 2400,0,n.nn’ where n.nn is the firmware | ||
| revision code. |
|
|
| Syntax | *IDN? |
|
| Parameters | none |
|
| Category | System | Type: Sequential |
*IST? | return the current value of the Individual Status bit as defined by IEEE | ||
| 488.1. |
|
|
| Syntax | *IST? |
|
| Parameters | none |
|
| Category | Status | Type: Sequential |
*OPC | causes the XMP 2600 to suspend further parsing of commands and | ||
| queries until all pending operations have finished. Then, the Operation | ||
| Complete (opc) event bit of the Standard Event Status Register will be | ||
| set. |
|
|
| Syntax | *OPC |
|
| Parameters | none |
|
| Category | Synchronization | Type: Sequential |
*OPC? | causes the XMP 2600 to suspend command parsing until all pending | ||
| operations have been finished. Then, the XMP 2600 response to the | ||
| Query with: “1”. |
|
|
| Syntax | *OPC? |
|
| Parameters | none |
|
| Category | Synchronization | Type: Sequential |
*OPT? | return a “1” if the XMP 2600 has a Front Panel or “0” if no Front | ||
| Panel exists or connected. |
| |
| Syntax | *OPT? |
|
| Parameters | none |
|
| Category | System | Type: Sequential |
XMP 2600 Programming Manual rev. 1.1 | 41 |
