Xantrex Technology XMP 2600 manual Commands and Queries Reference, Alphabetical reference

Alphabetical reference		Commands and Queries Reference
GRP?	return the	current definition of the group of Power Modules. The
	response is made up of two decimal numbers (each in the range 0 to
	255) being the high (sent first) and low parts of a 16-bit word. Each
	bit in the response represents one Power Module (see GRP command
	for details on bit values).
	Syntax	GRP?
	Parameters	none
	Category	System	Type: Sequential
IALL?	return output current measurements of all installed Power Modules.
	The response is a series of values - one for each installed Power
	Module, separated with “,”, starting with the lower numbered module.
	Syntax	IALL?
	Parameters	none
	Category	Read-back	Type: Sequential
ID?	return the identification string: ‘XANTREX XMP 2600’.
	Syntax	ID?
	Parameters	none
	Category	System	Type: Sequential
IHIGH	program the upper window warning level for the output current of the
	Power Module.
	Syntax	IHIGH <ch>,<value>
	Parameters	the number of the Power Module to be programmed.
		the value to be set as the upper window warning
		level for the output current. The upper limit of the
		programmed value is IMAX. The lower limit of the
		programmed value is ISET.
	Category	Warnings	Type: Sequential
IHIGH?	return the current settings for the upper window warning level of the
	output current of the Power Module. The response is a <value>.
	Syntax	IHIGH? <ch>
	Parameters	the number of the channel to be queried.
	Category	warnings	Type: Sequential

50 XMP 2600 Programming Manual rev. 1.1