Scan from the OneTouch Button Panel

Scanning from the button panel on your computer’s screen works like pressing a button on the scanner. The scanner scans the item, then sends the image to the Destination Application indicated by the button’s icon.

To scan from the OneTouch Button panel:

1.Load the documents into the scanner.

2.Click on the OneTouch icon in the Windows notification area (at the lower right corner of the screen.) OneTouch Icon

3.The OneTouch Button Panel opens.

4.Click the button you want to use to scan.

5.The scanner starts scanning and the image is sent to the selected destination for the OneTouch button you are using to scan.

Features of the OneTouch Button Panel

The OneTouch panel is your on-screen set of controls for the scanner. From the panel you can access the hardware settings for your scanner and configure the scanning buttons.

Click on the OneTouch icon to open the panel.

The Title Bar

Green arrows—click to cycle through the panel’s 3 views.

Scanner icon—click to open the scanner’s hardware properties.

Red “X”—click to close the OneTouch panel.

The Button View

Left-clickon a Destination Application icon to start scanning.

Right-clickon a Destination Application icon to open the OneTouch Properties.

Left-clickon the arrow buttons, on the right side of the panel, to view the rest of the OneTouch buttons.

48Xerox® DocuMate® 4830 User’s Guide

Page 48
Image 48
Xerox 4830 manual Scan from the OneTouch Button Panel, Features of the OneTouch Button Panel