Manual Feed
Select this option to enable a delay from when the last page is scanned and when the scanner stops the scan job. This allows you to scan one page at a time without having to click Scan for each page you put in the scanner.
To scan with manual feed mode:
1.Select Manual feed in the scanner’s interface.
2.In the Timeout field, input the amount of time you want the scanner to wait from when the last page is scanned and when the scanner stops scanning.
3.Place a document in the scanner.
4.Click Scan.
5.The scanning progress dialogue
6.When you are done scanning all pages in your document, you can click on Abort to stop the timer or simply let the timer run out.
Detect Double Feeds
Detect double feeds is the scanner's ability to detect when two or more pages are fed through the scanner at the same time. When this option is turned on, ultrasonic waves are aimed at the document to detect multiple pages by the level at which the waves pass through the pages. The accuracy of this sensor depends on paper thickness and whether or not creasing is in the original document.
This option is available in the interface only if the current scanner supports this feature.
Technical Note:
If you are getting false double feed errors, try cleaning the inside of the scanner. Excessive dust on the sensor can cause false double feed errors. Refer to the maintenance section of the scanner's user guide for instructions on cleaning the scanner.
Straighten Image
Select this option to let the scanner automatically determine if a page is skewed, then straighten its image. This option is only available if the scanner supports this feature.
If you are scanning using an automatic document feeder, and the page is fed through at too great of an angle, the image may not straighten correctly. In that case,
Rotate Image
Select an option in this list to have the final image rotated when scanning is complete.
