1 Before Using the Machine
Maintenance
Any operator product maintenance procedures will be described in the customer documentation supplied with the product. Do not carry out any maintenance procedures on this product which are not described in the customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from the electrical outlet. Always use materials specified for this product. The use of other materials may result in poor performance and may create a hazardous situation. Do not use aerosol cleaners, they may be explosive and flammable under certain circumstances.
WARNING - Electrical Safety Information
ZOnly use the power cord supplied with the equipment.
ZPlug the power cord directly into a grounded electrical outlet easily accessible. Do not use an extension cord. If you do not know whether an outlet is grounded, consult a qualified electrician.
ZThis equipment is to be used on a branch circuit that has larger capacity than rated ampere and voltage of this machine. See data plate on the rear panel for the rated ampere and voltage of this equipment. If the machine needs to be moved to a different location, contact a Xerox Service Representative or your authorized local representative or service support organization.
ZImproper connection of the
XDo not place this equipment where people might step on or trip over the power cord.
XDo not place objects on the power cord.
XDo not override or disable electrical or mechanical interlocks.
XDo not obstruct the ventilation openings.
XNever push objects of any kind into slots or openings on the equipment.
ZIf any of the following conditions occur, switch off the power to the machine immediately and disconnect the power cord from the electrical outlet. Call an authorized local service representative to correct the problem.
–The equipment emits unusual noises or odors.
–The power cord is damaged or frayed.
–A wall panel circuit breaker, fuse, or other safety device has been tripped.
–Liquid has spilled into the equipment.
–The equipment is exposed to water.
–Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a
10 | Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide |
