Xerox 604P18037 manual Line, Finisher, Duplex Module, Trays 3

2 Product Overview

Finisher Tray

Finisher (Optional)

Tray 4

Tray 3

Tandem Tray Module (Optional)

TEL

Located on the back of the machine. Connect a telephone to this jack if required.

LINE 1

Located on the back of the machine. Connect a telephone cable to this jack. Then connect the other end to the wall jack.

Finisher

Allows you to staple or sort copies automatically. The Finisher Tray can hold 1,000 sheets of 20 lb bond or 80 g/m2 paper in Letter/A4 size or smaller.

Duplex Module

Allows you to make double-sided copies. The Duplex Module can be used when paper is supplied from Tray 1, 2, 3, or 4. For more information, refer to 2 Sided in the Copy chapter on page 45.

Trays 3 & 4

At the base of the machine, the following optional trays will be available, depending on the configuration.

•Two Tray Module – Can be added to the standard 2-tray configuration. Each tray can hold 500 sheets of 20 lb bond or 80 g/m2 paper.

•Tandem Tray Module – Can be added to the standard 2-tray configuration to provide high volume paper sources. Tray 3 can hold a maximum of 800 sheets of 20 lb bond or 80 g/m2 paper in Letter or A4 size, long edge feed. Tray 4 can hold 1,200 sheets of 20 lb bond or 80 g/m2 paper in Letter or A4 size. The Tandem Tray Module is referred to as “TTM” in this manual.

26 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide