Job Assembly
Date and Time
Prints the date and time that the copy job started on each of the copies. The [Set Numbering - Date and Time] screen is displayed. Select [On] to enable the feature.
Serial Number
Prints the serial number of the machine on the copies. The [Set Numbering - Serial Number] screen displays. Select [On] to enable the feature.
Job Assembly
This section describes how to make settings on the [Build Job] feature. For more information on the feature, refer to the following.
Build Job – page 67
1.Press the <All Services> button on the control panel.
2.Select [Copy] on the touch screen.
3.Select the [Job Assembly] tab.
Build Job
This feature allows you to make copies with different settings for single pages or groups of pages yet run the job as a single job. For example, if a job consists of some sections with text and some with photos, you can select the appropriate settings to be applied to each section and then print them at one time. You can also print only one set of the job prior to printing out the whole quantity. This will allow you to check the print result and adjust the settings if necessary.
1.Select [Build Job] on the [Job Assembly] screen.
2.Select the required option.
3.Select [Save].
Off
Disables the feature.
On
Enables the feature.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide | 67 |
