Xerox 604P18037 manual Supported Paper Types

7 Paper and Other Media

Supported Paper Types

The following table lists the paper types supported for each paper tray, duplex module, and the finisher.

Paper Type	Weight (g/m2)		Tray 2, 3–4	Tray 5	Duplex	Finisher
		Tray 1	(Two Tray
				(Bypass)	Module
			Module/TTM)
Plain		O	O	O	O	O
Recycled	60–105	O	O	O	O	O
Side 2 Paper*		O	O	O	X	O
Transparency	–	O	O	O	X	X
Labels	60–105	O	O	O	X	X
Lightweight**	–	O	O	O	X	X
Heavyweight 1	106–169	X	O	O	X	X
Heavyweight 2	170–216***	X	O	O	X	X

O: Available

X: Not available

•Plain: When using Arjo Wiggins Conqueror High Speed Laser Laid CON90F (64010283), select [Heavyweight1] on the [Paper Type] screen.

•Side 2 Paper: Refers to the paper already printed on one side (i.e. scrap paper).

•Transparency: When using Xerox paper backed (3R3028) (for US) or 3M Type L Desktop Laser (3R91334) (for EU) in low temperature and humidity (10oC, 15%) select [Heavyweight1] on the [Paper Type] screen.

•If you select [Label], [Heavyweight 1] or [Heavyweight 2], load the paper LEF. If loading the paper SEF, printed quality may be negatively affected.

•Lightweight: If you select [Lightweight], the machine lowers the temperature of the fuser unit when printing. Select this option when paper curls or other pritning problems occur due to high temperature in the fuser unit when it sets toner on the paper.

•Heavyweight: Depending on heavyweight paper, the machine cannot load Short Edge Feed. In that case, set the paper Long Edge Feed.

•Depending on the type of paper used and the operating environment, paper may not feed to the machine properly, or print quality may be negatively affected.

90 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide