Xerox 604P18037 manual Paper Supply Screen, Tray 5 Bypass Screen, Paper Size, More, Auto, Presets

3 Copy

More

Displays the [Paper Supply] screen.

[Paper Supply] Screen

Allows you to select a paper tray from up to five preset trays including the bypass tray.

1.Select [More] for the [Paper Supply] feature on the [Basic Copying] screen.

2.Select the required option.

3.Select [Save].

Auto

Refer to the [Auto] option explained previously.

Presets

Allows you to select a paper tray from up to four presets.

Bypass

Displays the [Tray 5 (Bypass)] screen.

[Tray 5 (Bypass)] Screen

You can temporarily use the bypass tray to load paper that is unavailable from the preprogrammed trays. Up to a 10 mm or 0.4 inch stack of paper (approximately 95 sheets of 80 g/m2 paper) can be loaded into the bypass tray. Follow the steps below to make full use of the bypass tray.

1.Select [Bypass Tray] on the [Paper Supply] screen.

2.Select the required option.

3.Select [Save].

Paper Size

•Auto Size Detect – Automatically senses the paper size fed from the bypass tray.

•Standard Size – Displays the preset paper sizes on the touch screen, and allows you to select the paper size from the displayed paper size. The preset paper size is set up by Key Operator.

•Non-standard Size – Allows you to specify the width and length of paper size using the scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper sizes are 89–297 mm (3.5–11.7 inches) for width and 99–432 mm (3.9–17.0 inches) for length.

44 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide