7 Paper and Other Media
2. Slide the side guides towards the paper until they are just touching the edge of the stock.
Tandem Tray Module (TTM)
The Tandem Tray Module allows you to load larger amounts of paper. It consists of two trays.
NOTE: You cannot load custom size paper into the Tandem Tray Module.
1. Pull out the Tray 3 or Tray 4 of TTM.
The elevator in the tray lowers.
2. Place the paper stock tightly against the left rear corner of the tray.
NOTE: Do not load paper above the maximum fill line.
NOTE: Always load paper into the tray in the orientation shown in the diagram.
3.Close the tray.
The elevator rises and positions the paper for use.
Auto Tray Switching
The machine automatically switches from one tray to another under the following conditions.
•When printing and the active tray runs out of paper.
•When the paper size sensed differs from the previously determined size.
•When paper feeding starts and the selected tray is open.
•When paper feeding starts and the selected tray malfunctions.
NOTE: The bypass tray cannot be used with Auto Tray Switching.
NOTE: Key Operator access is required to set target trays and priorities. For more information, refer to Paper Tray Priority in the Setups chapter and Paper Type Priority in the Setups chapter on User Guide.
86 | Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide |
