New Zealand Telecom Warning Notice

Regulatory Information

1.The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.

The equipment may not be capable of correct operation at the higher data speeds designated. 33.6 kbps and 56 kbps connections are likely to be restricted to lower bit rates when connected to some PSTN implementations. Telecom will accept no responsibility should difficulties arise in such circumstances.

2.Immediately disconnect this equipment should it become physically damaged, and arrange for its disposal or repair.

3.This modem shall not be used in any manner which could constitute a nuisance to other Telecom customers.

4.This device is equipped with pulse dialing, while the Telecom standard is DTMF tone dialing. There is no guarantee that Telecom lines will always continue to support pulse dialing.

5.Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to 'bell tinkle' or noise and may also cause a false answer condition. Should such problems occur, the user should NOT contact the Telecom Faults Service.

6.The preferred method of dialing is to use DTMF tones, as this is faster than pulse (decadic) dialing and is readily available on almost all New Zealand telephone exchanges.

7.Warning Notice: No '111' or other calls can be made from this device during a mains power failure.

8.This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

9.Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications:

For repeat calls to the same number:

• There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and

• The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.

For automatic calls to different numbers:

• The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is no less than 5 seconds between the end of one call attempt and the beginning of another.

10.For correct operation, total of the RN’s of all devices connected to a single line at any time should not exceed 5.

236WorkCentre 6400 Multifunction Printer User Guide

6400 specifications

The Xerox 6400, a notable entry in the multifunction printer category, emerged during the 1990s, when technology was rapidly evolving. Known for its robust functionality and exceptional output quality, the Xerox 6400 became a reliable choice for businesses that needed efficient document production.

One of the standout features of the Xerox 6400 is its versatile printing capabilities. It offered both color and black-and-white printing, allowing organizations to create a variety of documents, from standard reports to impressive marketing materials. With a maximum print resolution of 600 x 600 dpi, it delivered crisp text and vibrant images, ensuring that printed materials were of professional quality.

The Xerox 6400 utilized laser printing technology, which provided advantages such as faster print speeds compared to inkjet counterparts. The printer achieved print speeds of up to 8 pages per minute for color and 16 pages per minute for black-and-white, catering to the needs of busy office environments. Additionally, with its high-capacity toner cartridges, users experienced less frequent toner replacements, enhancing productivity.

Another significant characteristic of the 6400 was its user-friendly interface. The printer featured a simple control panel, making it easy for users to navigate settings and perform tasks. It also supported various connectivity options, including parallel and optional Ethernet interfaces, enabling seamless integration into existing network setups.

The Xerox 6400 also prioritized paper handling, accommodating various media types and sizes. Its standard paper tray held up to 250 sheets, while an optional second tray could expand capacity even further. This flexibility made it suitable for various printing tasks, from general office documents to specialty media.

In terms of durability and reliability, the Xerox 6400 was built to withstand the demands of a high-volume printing environment. Its robust construction and high monthly duty cycle meant that it could handle substantial workloads without compromising performance.

In conclusion, the Xerox 6400 stood out in the market due to its combination of high-quality printing, user-friendly features, and a robust design. It effectively addressed the diverse needs of businesses, making it a popular choice for those requiring a dependable color printer capable of delivering professional results. While technology has advanced since its release, the Xerox 6400 remains a testament to the evolution of office printing solutions.

Xerox 6400 manual New Zealand Telecom Warning Notice

Models: 6400