Graphical user interface (GUI) menu

Center (Center speaker)

Choice

Descriptions

 

 

Large

Select this setting when the center speaker is large.

 

 

Small

Select this setting when the center speaker is small.

 

 

None

Select this setting when you do not use the center

 

speaker. The center channel signals are directed to the

 

front left and right speakers.

 

 

Surround (Surround left/right speakers)

Choice

Descriptions

 

 

Large

Select this setting when the surround speakers are large.

 

 

Small

Select this setting when the surround speakers are small.

 

 

None

Select this setting when you do not use the surround

 

speakers. This unit is set to the Virtual CINEMA DSP

 

mode (see page 64), and “Surround Back” is

 

automatically set to “None”.

 

 

y

See page 23 for the connection information of the surround speakers.

Surround Back

(Surround back left/right speakers)

Choice

Descriptions

 

 

Large x1

Select this setting when the single surround back speaker

 

is large.

 

 

Large x2

Select this setting when the surround back left and right

 

speakers are Large.

 

 

Small x1

Select this setting when the single surround back speaker

 

is small.

 

 

Small x2

Select this setting when the surround back left and right

 

speakers are small.

 

 

None

Select this setting when you do not use the surround

 

back speakers. The surround back channel signals are

 

directed to the surround left and right speakers.

 

 

y

See page 23 for the connection information of the surround speakers.

Cross Over (Cross over)

Use this feature to select the crossover frequency of the speaker(s) that is set to “Small”. All frequencies below the selected frequency will be sent to the subwoofers or to the speakers set to “Large” in “Speaker Set” (see pages 99).

Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

y

If your subwoofers can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum.

Front Presence (Front presence speakers)

Use this feature if you want to use the front presence speakers connected to this unit.

Choice

Descriptions

 

 

Yes

Select this setting when you use the front presence

 

speakers.

 

 

None

Select this setting when you do not use the front

 

presence speakers. “Rear Presence” is automatically set

 

to “None”.

 

 

Notes

•If you set “Front Presence” to “None”, you cannot activate the CINEMA DSP HD³ mode (see page 64).

•“Dialogue Lift” is available when “Front Presence” is set to “Yes” and headphones are not connected.

Rear Presence (Rear presence speakers)

Use this feature if you want to use the rear presence speakers connected to this unit.

Choice

Descriptions

 

 

Yes

Select this setting when you use the rear presence

 

speakers.

 

 

None

Select this setting when you do not use the rear presence

 

speakers.

 

 

Subwoofer (Subwoofer)

Configuration (Subwoofer configuration)

Use this feature to select the configuration of the subwoofers (see page 26).

Choice

Descriptions

 

 

Front & Rear

Select this setting when you place the subwoofers to

 

the front and rear of the listening room.

 

 

Stereo

Select this setting when you place the subwoofers to

 

the left and right of the listening room.

 

 

Monaural

Select this setting when you use a single subwoofer.

 

 

None

Select this setting when you do not use a subwoofer.

 

 

y

If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum.

100 En