Yamaha RX-Z11 96 En, Input Select, ■I/O Assignment, (Input/output assignment), ■Station Search (U.S.A. model only)

Graphical user interface (GUI) menu

Input Select

Use this feature to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the level of the signal input at each input source.

Input source	Sub input	Parameter
	source
XM		Volume Trim
(U.S.A. and	—	Rename
Canada models
only)
TUNER	HD Radio (U.S.A.	Station Search
	model only)	(U.S.A. model only)
		Volume Trim
		Rename
	TUNER (U.S.A.	Volume Trim
	model only)	Rename
MULTI CH		Volume Trim
	—	Rename
		Multi CH Assign
		BGV
PHONO		I/O Assignment
CD		Audio Select
CD-R		Decoder Mode
MD/TAPE		Volume Trim
BD/HD DVD	—	Rename
DVD
DTV
CBL/SAT
DVR
VCR
V-AUX		I/O Assignment
		Audio Select
	—	Decoder Mode
		Volume Trim
		Rename
DOCK	—	Volume Trim
		Rename
NET/USB	PC/MCX	Volume Trim
		Play Style
	NET RADIO	Volume Trim
	USB	USB Select
		Volume Trim
		Play Style

Notes

•Some parameters described above may not be available for all input sources and some parameters are only available for specific input sources.

•You can set “Volume Trim” for each sub input source separately.

•The “Play Style” setting is effective to both “PC/MCX” and “USB”.

■Station Search (U.S.A. model only)

Use this feature to select the preset HD Radio stations by the name of the stations. See page 72 for details.

■I/O Assignment(Input/output assignment)

Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.

Once the input/output jacks are reassigned, you can select the corresponding component by using the DINPUT selector (or the input selector buttons(3)).

I/O Assignment	Coaxial Input
Audio Select	Optical Input
Decoder Mode	Optical Output

Example 1: Assigning the CD DIGITAL INPUT COAXIAL jack to “VCR”.

1Select “Input Select” in the GUI menu and then select “VCR”.

2Select “I/O Assignment” and then “Coaxial Input”.

3Select “5CD”.

Example 2: Clearing a jack assignment.

1Select “Input Select” and then select the desired input source (“DVD”, etc.).

2Select “I/O Assignment” and then select the desired jack assignment (“Coaxial Input”, “Optical Input”, “Optical Output”, “Analog I/O” “Component Video”, or “HDMI”).

3Select “None” and then press 9ENTER to clear the assignment.

Notes

•“None” appears in the GUI when any input source is not assigned to the input/output jack.

•You cannot select a specific item more than once for the same type of jack.

•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to signals input at the COAXIAL jack.

96 En