8Once all measurement items are set successfully, following display appears in the menu screen.
| ||
| ||
|
| ||
|
In this menu, you can perform the following operations:
•Press 9n and select “Setup” to set the measured values.
•Press 9k and select “Retry” to retry the automatic setup procedure. This unit starts the automatic setup procedure immediately again.
•Press 9h and select “Detail” to view information about measurement results and warning messages. In the information display, press 9k / n repeatedly to toggle between the parameters. See page 50 for details.
•Press 9l to cancel the measurement results and exit from the automatic setup menu.
If error or warning messages appear...
| ||
| ||
|
Error or warning messages
When this unit detects potential problems during the automatic setup procedure, error or warning messages appears in the result display. See the “Auto Setup” section in “Troubleshooting” on page 152 for a complete list of error or warning messages and proper remedies.
Press 9lto view the detailed information of the error or warning messages.
9Press IMENU to turn off the GUI menu.
Notes
•After you have completed the automatic setup procedure, be sure to disconnect the optimizer microphone.
•The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.
Optimizing the speaker setting for your listening room (YPAO)
■Reviewing the result of the automatic setupUse this feature to review the result of the automatic setup.
1Set the operation mode selector to FAMP and then press IMENU to turn on the GUI screen.
2Press 9k / n repeatedly and then 9h to select “Auto Setup”.
|
| Auto Setup |
| Information | Preparation | |
|
|
| ||||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3Press 9k to select “Information”.
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
| |||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4Press 9h and then 9k / n repeatedly to select the desired check items.
|
| |||
| ||||
Reload:ENTER