Saving and recalling the system settings (System Memory)
Loading the stored system settings |
|
|
|
|
|
|
|
| 4 Press 9k / n to select “Main Load” and then press | ||||||
|
| 9h. |
|
| |||
• Before performing the following operations, set the operation mode |
| The following menu appears in the video monitor. | |||||
selector on the remote control to FAMP. |
|
|
|
|
|
|
|
• This unit overwrites the stored settings to the current settings of this |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
unit. If you do not want to erase the current settings, save the current |
|
|
|
|
|
| |
settings to any System Memory number in advance. |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
| ■ Loading by the 7SYSTEM MEMORY buttons |
|
|
| ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
You can recall the system settings stored in “Memory1” to |
|
|
|
| |||
|
|
|
| ||||
|
|
|
| ||||
“Memory4” by pressing the corresponding 7SYSTEM MEMORY |
|
|
|
|
| ||
|
|
|
|
| |||
buttons. |
|
|
|
|
|
| |
|
|
|
|
|
| ||
y |
|
| |||||
y |
|
| |||||
To recall the system settings for Zone 2, Zone 3, or Zone 4, press HZONE on the remote control repeatedly to select the operation zone setting of the remote control in advance. You can recall the system settings for the selected zone only when the zone is turned on.
If system settings are already stored in the selected memory number, the stored system parameter settings appear in the menu screen. “Memory Empty” appears in the menu screen if no system settings are stored in the selected memory number.
1Press one of the 7SYSTEM MEMORY buttons on the remote control to select the desired memory number.
“MEMORY 1 LOAD” (example) appears in the front panel display.
y
“EMPTY” appears in the menu screen if no system settings are stored in the selected memory number.
2Press the selected 7SYSTEM MEMORY button once more to confirm the selection.
This unit loads the settings stored in the selected memory number.
■Loading by the GUI menu operation1Press IMENU on the remote control.
The top menu appears in the video monitor.
2Press 9k / n repeatedly to select “System Memory” and then press 9h.
The “System Memory” menu appears in the video monitor.
3Press 9k / n repeatedly to select the desired zone and then press 9h.
In the following example, you select “Main” (main zone). The list of the memory number appears in the video monitor.
5Press 9k / n repeatedly to select the desired memory number where the system settings are stored and then press 9h.
Once “Load: ENTER” appears in the video monitor, press 9ENTER to confirm the loading.
y
You can cancel the loading by pressing 9l.
|
|
| |
|
|
| |
|
| ||
|
| ||
| |||
|
|
| |
|
| ||
| |||
|
| ||
|
| ||
|
| ||
|
|
| |
|
|
| |
|
|
|
6Press IMENU to exit from the GUI menu.
|
| Main Load |
| Memory1 |
|
| |||
|
| Main Save |
| Memory2 |
|
| |||
|
| Main Rename |
| Memory3 |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Note
You can recall the system settings for the selected zone only when the zone is turned on.