5Press GSETUP again to exit from the setup mode.

■Clearing a learned function (ERASE)

1Press GSETUP using a ballpoint pen or similar object.

“SETUP” appears in the display window (4).

SETUP

2Press 9k / n repeatedly to select “ERASE” and then press 9ENTER.

The remote control enters the learning mode. “ERASE” and the name of the currently selected control area appears in the display window (4) alternately.

ERASE DVD

3Set the operation mode selector to FSOURCE and then press an input selector button (3).

“ERASE” and the name of the selected control area appears in the display window (4) alternately.

y

•You can also select the desired control area by pressing 5SELECT l / h repeatedly.

•If you want to erase the function learned in the AMP or TV control area, set the operation mode selector to FAMP or FTV.

4Press 9ENTER.

“E-KEY” appears in the display window (4).

E-KEY

5Press and hold the button you want to clear for about 3 seconds.

If clearing is successful, “ERASE” and “OK” appears in the display window (4).

ERASE OK

y

•If you continuously want to clear another function, repeat step 3.

•Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).

6Press GSETUP again to exit from the setup mode.

Notes

•“NG” appears in the display window (4) on the remote control if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press more than one button simultaneously.

Remote control features

Operation

Advanced

 

 

131 En