IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

•Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

Compliance with FCC regulations does not guarantee that

This product, when installed as indicated in the instructions

interference will not occur in all installations. If this product is

contained in this manual, meets FCC requirements. Modifications

found to be the source of interference, which can be determined by

not expressly approved by Yamaha may void your authority, granted

turning the unit “OFF” and “ON”, please try to eliminate the

by the FCC, to use the product.

problem by using one of the following measures:

2 IMPORTANT: When connecting this product to accessories and/or

Relocate either this product or the device that is being affected by

another product use only high quality shielded cables. Cable/s

the interference.

supplied with this product MUST be used. Follow all installation

Utilize power outlets that are on different branch (circuit breaker or

instructions. Failure to follow instructions could void your FCC

fuse) circuits or install AC line filter/s.

authorization to use this product in the USA.

In the case of radio or TV interference, relocate/reorient the antenna.

3 NOTE: This product has been tested and found to comply with the

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

requirements listed in FCC Regulations, Part 15 for Class “B”

coaxial type cable.

digital devices. Compliance with these requirements provides a

If these corrective measures do not produce satisfactory results,

reasonable level of assurance that your use of this product in a

please contact the local retailer authorized to distribute this type of

residential environment will not result in harmful interference with

product. If you can not locate the appropriate retailer, please contact

other electronic devices.

Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena

This equipment generates/uses radio frequencies and, if not installed

Park, CA 90620.

and used according to the instructions found in the users manual,

 

may cause interference harmful to the operation of other electronic

The above statements apply ONLY to those products distributed by

devices.

Yamaha Corporation of America or its subsidiaries.

4 En