Yamaha RX-Z11 123 En, Customizing the remote control, mode), ■Selecting a component to be controlled, ■Controlling optional components (Option

■Selecting a component to be controlled

You can select a component to be controlled independently of the input source selected with the input selector buttons.

Press 5SELECT l / h repeatedly to select the desired component.

The name of the component to be controlled appears in the display window (4) on the remote control.

DVD

■Controlling optional components (Optionmode)

“OPTN1” and “OPTN2” are optional component control areas that can be programmed with remote control functions independently from any input source. This areas are useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.

To select the option mode, press 5SELECT l / h repeatedly until “OPTN1” or “OPTN2” appears in the display window (4) on the remote control.

OPTN1

or

OPTN2

Note

You cannot set a remote control code for the optional component control areas. See page 126 to program buttons operated within these component control areas.

Remote control features

Customizing the remote control

Use the setup mode of the remote control to customize the remote control.

1Press GSETUP on the remote control using a ballpoint pen or similar object.

“SETUP” appears in the display window on the remote control.

2Press 9k / n repeatedly to select the desired setup mode.

Setup mode	Descriptions	Page
SETUP	Top setup mode menu.	–
LEARN	Learning mode. Use this feature to program codes	126
	from other remote controls.
P-SET	Preset mode. Use this feature to change the remote	124
	control code of each control area.
RNAME	Renaming mode.Use this feature to change the	127
	name of each control area.
MACRO	Macro programming mode.Use this feature to set	129
	the macro program.
CLEAR	Clearing mode. Use this feature to clear the	130
	configurations of this unit.
ERASE	Erase mode. Use this feature to erase the learned	131
	functions of each button.
EX-IR	Extended IR code mode. This feature is for the	—
	authorized custom installers only.
LIGHT	Backlight mode. Use this feature to set the light up	124
	mode of the remote control.

3After the configurations, press GSETUP again to exit from the setup menu.

Note

If you do not complete each of the operations within 30 seconds, this unit automatically exits from the setup menu.

Operation Advanced

123 En