Graphical user interface (GUI) menu

Zone2 Mono/Zone3 Mono/Zone4 Mono (Zone 2/Zone 3/Zone 4 monaural mode)

Use this feature to select whether you play back sources monaurally in the selected zone.

Choice

Descriptions

 

 

Off

Turns off the monaural playback mode. This unit plays

 

back sources in stereo.

 

 

On

Turns on the monaural playback mode. This unit mixes

 

down the left and right channel signals and plays the

 

sources monaurally.

 

 

Muting Type

(Zone 2/Zone 3/Zone 4 muting type)

Use this feature to adjust how much the mute function reduces the output volume of the selected zone.

Choice

Functions

 

 

Full

Mutes all the audio output.

 

 

–20dB

Reduces the current volume by 20 dB.

 

 

–40dB

Reduces the current volume by 40 dB.

 

 

Tuner Select

(Zone 2/Zone 3/Zone 4 tuner function select) (U.S.A. model only)

Selects whether this unit receives HD Radio station signals in the selected zone (see page 41).

Choice

Functions

 

 

TUNER

Receives the conventional AM/FM radio signals from

 

the ANTENNA–2 terminals.

 

 

HD Radio

Receives HD Radio station signals from the

 

ANTENNA–1 terminals.

 

 

■Zone OSD (Zone on-screen display)

Use this feature to display the operational status of Zone 2, Zone 3, and Zone 4 on the Zone 2 video monitor connected to the ZONE VIDEO jacks on the rear panel of this unit. The Zone 2, Zone 3, and Zone 4 information to be displayed is listed as follows:

•The input source

•The volume level

•The audio mute status

•The tonal quality status

•iPod or network/USB menu when “DOCK” or “NET/USB” is selected as the input source of Zone 2, Zone 3, and/or Zone 4

•FM/AM tuning information when “TUNER” is selected as the input source of Zone 2, Zone 3, and/or Zone 4

•HD Radio information when this unit is tuned into a HD Radio station in Zone 2, Zone 3, or Zone 4

•The XM Satellite Radio information when “XM” is selected as the input source of Zone 2, Zone 3, and/or Zone 4 (U.S.A. and Canada models only)

Choice

Functions

 

 

Zone2

Displays the operational status of Zone 2 only.

 

 

Zone All

Displays the operational status of Zone 2, Zone 3, and

 

Zone 4.

 

 

Notes

•You can connect up to two composite and one component video monitors to the ZONE OUT VIDEO jacks and ZONE OUT COMPONENT VIDEO jacks. If you connect multiple video monitors to the ZONE VIDEO and ZONE OUT COMPONENT VIDEO jacks, these video monitors display the same video images of the input source of Zone 2.

•When you set “Zone OSD” to “Zone All”, the operational status of Zone 3 and Zone 4 appears on the Zone 2 video monitor(s) even if Zone 2 is turned off.

110 En