6Press and hold the button you want to program on the other remote control until “OK” appears in the display window (4).

“NG” appears in the display window (4) if learning was unsuccessful. In this case, start over from step 4.

 

 

SELECT

 

 

TUNER

CBL SAT

BD DVD HD

MULTI

TV

POWER

SYSTEM

MODE

SETUP

 

 

DOCK

DTV

DVD

AUX-V

AV

POWER

MEMORY

MACRO

 

 

NET USB

DVR

CD

PHONO

 

STANDBY

 

 

ID

 

 

 

 

 

 

 

 

 

ZONE

SOURCE

TV

AMP

XM

VCR

R-CD

MD TAPE

 

POWER

(U.S.A. and Canada

Other remote control

models)

 

Remote control features

Changing source names in the display window (RNAME)

You can change the name of the control area (input source) that appears in the display window (4) on the remote control if you want to use a different name than the factory preset. This feature is useful when you have set an control area to control a different component.

1Set the operation mode selector to FSOURCE and then press an input selector button (3) to select the desired control area.

The name of the control area you want to customize appears in the display window (4) on the remote control.

OKBD/HD

y

•When you want to program another function, repeat steps 4 and 6.

•When you continuously want to program another function for another control area, set the operation mode selector to FSOURCE and then press 5SELECT l/ hrepeatedly and then repeat steps 4 through 6. If you want to select “TV” as the control area, set the operation mode selector to FTV and then repeat steps 4 through 6.

7Press GSETUP again to exit the setup menu.

Notes

•“ERROR” appears in the display window (4) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.

•This remote control can learn approximately 200 functions. However, depending on the signals learned, “FULL” may appear in the display before you program 200 functions. In this case, clear unnecessary programmed functions to make room for further learning.

•Learning may not be possible in the following cases:

–when the batteries in the remote control for this unit or other components are weak.

–when the distance between the two remote controls is too great or too small.

–when the remote control infrared windows are not facing each other at the appropriate angle.

–when the remote control is exposed to direct sunlight.

–when the function to be programmed is continuous or uncommon.

2Press GSETUP using a ballpoint pen or similar object.

“SETUP” appears in the display window.

SETUP

3Press 9k / n repeatedly to select “RNAME” and then press 9ENTER.

The remote control enters the renaming mode. “RNAME” and the name of the selected control area appears in the display window alternately.

RNAME BD/HD

y

You can change the renamed control area by pressing an input selector button (3) or 5SELECT l / h repeatedly.

4Press 9k / n repeatedly to select 3-letter name or 5- letter name you want to edit.

Each control area has both 3-letter name and 5-letter name. You can rename the 3-letter name and 5-letter name independently.

3-letter name

5-letter name

BD BD/HD

5Press 9ENTER.

The edit screen of the name of the currently selected control area appears in the display window (4).

BD/HD

Operation

Advanced

 

 

127 En