Remote control features

6Press 9l / h repeatedly to move the cursor (_) to the position you want to edit.

7Press 9k / n repeatedly to select and enter the desired character.

Pressing 9k changes the character as follows:

A to Z, a to z, 0, 1 to 9, space, - (minus), + (plus), / (slash) and : (colon).

y

Pressing 9n changes the characters in reverse order.

8Repeat steps 6 and 7 until you change all the letters you want.

9Press 9ENTER to set the new name.

“OK” appears in the display window (4) on the remote control if renaming was successful.

y

When you want to rename the another name of the selected control area, press the input selector button (3) or 5SELECT l / h repeatedly to select the desired control area and then press 9ENTER and then carry out the operations of steps 4 through 9.

10Press GSETUP again to exit the setup menu.

The new name of the control area appears in the display window (4).

HDDVD

Note

“ERROR” appears in the display window (4) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.

Macro programming features

The macro programming feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start playback. The macro programming feature lets you perform all of these operations simply by pressing the CD macro button. The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros (see page 129).

■Recalling programmed macro-operations

POWER

POWER

STANDBY

POWER

 

TV

AV

 

 

 

MULTI

V-AUX

PHONO

MD

Macro buttons

 

 

 

TAPE

 

BD

DVD

CD

CD-R

 

HD DVD

 

 

 

 

 

CBL

DTV

DVR

VCR

 

SAT

 

 

 

 

 

TUNER

DOCK

NET

XM

 

USB

 

 

 

 

 

 

 

 

AMP

 

 

 

 

TV

 

 

 

 

SOURCE

MACRO

 

 

MODE

ZONE

SELECT

SETUP

ID MACRO

 

 

SYSTEM MEMORY

1 2 3 4

(U.S.A. and Canada models)

1Press HMACRO on the remote control.

MACRO

2Press the desired macro button.

“M:the 3-letter name of the selected control area” (for example, “M:DVD”) appears in the display window (4), and this unit transmits the programmed functions. When you press DSTANDBY or EPOWER, “M:STB” or “M:PWR” appears in the display window (4), and this unit transmits the programmed functions.

3Press HMACRO again to exit from the macro- operation mode.

Notes

•While the remote control is running a macro program, it does not accept any other operation until it has completed running the program (the transmission indicator in the display stops flashing).

•Continue to aim the remote control at the component the macro is operating until the macro operation is complete.

•If you do not complete each of the operations within 30 seconds, this unit automatically exits from the macro-operation mode.

128 En