XM™ Satellite Radio tuning (U.S.A. and Canada models only)

■Direct Number Access mode

1Press ISRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”.

A L L C H S E A R C H

or

C A T S E A R C H

2Press the numeric buttons (B) on the remote control to enter the desired three-digit channel number.

For example, to enter the number 123, press the numeric buttons as shown below.

CLASSICAL 1

CLASSICAL 2

LIVE/CLUB

1

2

3

The display changes as follows.

< X M > - - 1

< X M > - 1 2

< X M > 1 2 3

y

•To enter a one-digit or two-digit channel number, press the numeric buttons (B) on the remote control and then press NENT to confirm the input number.

•If no button is pressed within a few seconds after you enter a one-digit or two-digit number, this unit automatically confirms the entered channel number.

•If you enter the number 0, this unit displays your XM Radio ID (see page 74).

Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 3XM.

Setting the XM™ Satellite Radio preset channels

You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 75.

1Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes.

[ 0 4 3 ] X M U

Currently selected channel number

2Press JMEMORY (or 0MEMORY).

The MEMORY indicator flashes in the front panel display for approximately 10 seconds.

MEMORY

Flashes

Note

You must proceed to and carry out steps 3 through 5 while the MEMORY indicator is flashing in the front panel display.

3Press MPROGRAM (or 9CAT. l / h) repeatedly to select a preset channel group (A to E) while the MEMORY indicator is flashing.

The preset channel group letter appears in the front panel display.

 

 

C

[ 0 4 3 ] X M U

MEMORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently selected

 

preset channel group

 

 

 

Flashes

4Rotate MPROGRAM (or 9PRESET/CH k / n) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

C 5 [ 0 4 3 ] X M U

MEMORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Currently selected preset channel number

Flashes

76 En