Remote control features
Setting the backlight mode of the remote control (LIGHT)
You can set the backlight mode of the remote control.
1Press GSETUP on the remote control using a ballpoint pen or similar object.
“SETUP” appears in the display window (4) on the remote control.
2Press 9k / n repeatedly to select “LIGHT” and then press 9ENTER.
“LIGHT” and the current “LIGHT” setting appears in the display window (4) alternately.
LIGHT |
|
| ON |
|
| |
|
|
| ||||
| Current “LIGHT” setting | |||||
3Press 9k / n to select the desired setting.
Choice | Descriptions |
|
|
ON | Lights up the backlight when a button is pressed |
| or the remote control detects a motion. |
|
|
OFF | Lights up the backlight only when 6LIGHT is |
| pressed. |
|
|
4Press GSETUP again to exit from the setup mode.
y
You can light up the backlight by pressing 6LIGHT anytime.
Setting remote control codes (P-SET)
You can control other components by setting the appropriate remote control codes. Codes can be set up for each control area. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
The following table shows the default component (Library: component category) and the remote control code for each control area.
Remote control code default settings
| Library |
| Default | |
Control area | (component | Manufacturer | ||
code | ||||
| category) |
| ||
|
|
| ||
|
|
|
| |
MULTI | DVD | Yamaha | 04306 | |
|
|
|
| |
— | — | — | ||
|
|
|
| |
PHONO | — | — | — | |
|
|
|
| |
MD TAPE | MD | Yamaha | 00409 | |
|
|
|
| |
BD | DVD | Yamaha | 04306 | |
HD DVD | ||||
|
|
| ||
|
|
|
| |
DVD | DVD | Yamaha | 04306 | |
|
|
|
| |
CD | CD | Yamaha | 01105 | |
|
|
|
| |
Yamaha | 01405 | |||
|
|
|
| |
CBL | — | — | — | |
SAT | ||||
|
|
| ||
|
|
|
| |
DTV | — | — | — | |
|
|
|
| |
DVR | DVR | Yamaha | 00707 | |
|
|
|
| |
VCR | — | — | — | |
|
|
|
| |
TUNER | SOURCE | Yamaha | 00012 | |
|
|
|
| |
DOCK | SOURCE | Yamaha | 00012 | |
|
|
|
| |
NET | SOURCE | Yamaha | 00012 | |
USB | ||||
|
|
| ||
|
|
|
| |
XM |
|
|
| |
(U.S.A. and | SOURCE | Yamaha | 00012 | |
Canada models) |
|
|
| |
|
|
|
| |
(TAPE) | TAPE | Yamaha | 00311 | |
(Australia model) | ||||
|
|
| ||
|
|
|
| |
TV | — | — | — | |
|
|
|
|
Note
You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1Press GSETUP on the remote control using a ballpoint pen or similar object.
The remote control enters the setup menu. “SETUP” appears in the display window (4) on the remote control.
SETUP
2Press 9k / n repeatedly to select
The remote control enters the preset mode.