5Press JMEMORY (or 0MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.

A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

XM™ Satellite Radio tuning (U.S.A. and Canada models only)

When the channel number / name is displayed:

[ 0 4 3 ] X M U

When the channel category is displayed:

C 5 : [ 0 4 3 ] X M U

< C A T > R o c k

 

Colon (:)

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.

Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 3XM.

Displaying the XM™ Satellite Radio information

You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or video monitor.

Note

If a status message or an error message appears in the front panel display or video monitor, see the “XM Satellite Radio (U.S.A. and Canada models only)” section in “Troubleshooting” on page 146 for appropriate remedies.

■Displaying the XM Satellite Radio information in the front panel display

Press IDISPLAY (or KDISPLAY) repeatedly to toggle between the following XM Satellite Radio information display modes.

Channel number / name

Channel category

Artist name / Song title

When the artist name / song title is displayed:

C o l d p l a y / S p e

y

•You can set the front panel display mode by using the “Scroll” parameter in “Front Panel Disp.” (see page 112).

•If the XM Satellite Radio information contains a character that cannot be recognized by this unit, the character will be displayed with a space.

■Displaying the XM Satellite Radio information in the video monitor

Press IDISPLAY or (KDISPLAY).

The following information screen is displayed in the video monitor.

XM Satellite Radio reception level

 

 

 

 

 

 

 

 

XM Information

 

 

 

 

 

 

 

 

All CH Search

 

 

CH NUMBER

043 (Current)

 

 

CH NAME

XMU

 

 

 

 

CATEGORY

Rock

 

 

 

 

NAME

Coldplay

 

 

 

 

TITLE

Speed of sound

 

 

 

 

 

 

 

Hold: ENTER

 

 

 

 

 

 

 

y

•To turn off the displayed information screen, press IDISPLAY (or

KDISPLAY) again.

•You can set the time for which the XM Satellite Radio information is displayed in the video monitor by using the “On Screen” parameter in “Manual Setup” (see page 108).

•To hold the XM Satellite Radio information screen, press 9ENTER on the remote control while it is being displayed in the video monitor.

•The XM Satellite Radio information screen on hold is released if you press 9ENTER on the remote control again or if you change the XM Satellite Radio channel.

•This unit can save up to two XM Satellite Radio information screens for future reference. To view the previous two XM Satellite Radio information screens, press 8TITLE on the remote control repeatedly while the current XM Satellite Radio information screen is being hold.

•The current XM Satellite Radio reception level appears on the top of the XM Satellite Radio information screen. For the best reception, adjust the

orientation of the antenna of Home Dock so that “ ” or “” is displayed here. “no signal” is displayed if Home Dock is not connected to

this unit. In this case, check the antenna connections (see page 74).

•You can display the XM Satellite Radio information in the Zone video monitor (see page 141).

Operation

Source Internal

 

 

77 En