4Press 9n to select “EDIT” and press 9ENTER to access the edit window.

For more information on the parametric equalizer and each parameter, see page 160.

 

 

PEQ Data Copy

Band

#1

 

 

 

 

 

 

 

 

 

Gain

0.0dB

 

 

PEQ Select

Freq.

62.5Hz

 

 

Front L

Q

1.000

 

 

 

 

 

 

 

 

Front R

 

 

 

 

 

 

 

 

 

 

Center

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The parameter selected in “PARAM” is highlighted.

•Press 9l / h to adjust the parameter.

•Press 9k / n to adjust the “Gain”.

•Press 9ENTER to exit the edit window.

y

•When you select “Band” in step 3, you can use this menu as a graphic equalizer.

•“Band #4”, “Band #5”, “Band #6”, and “Band #7” can adjust the frequencies above of 500 Hz.

•When you select “Subwoofer L” or “Subwoofer R” in step 1 and “Band” in step 3, you can adjust “Band #1”, “Band #2”, and “Band #3” only. In this case, “Band #1”, “Band #2”, and “Band #3” can adjust the frequencies below of 250 Hz.

5Repeat steps 3 and 4 until you are satisfied with the results.

y

If you want to reset all “Parametric EQ” parameter settings for the selected speaker, select “RESET” and press 9ENTER.

6Select “EXIT” and press 9ENTER to exit from the settings window.

■Tone Control (Tone control)

Use this feature to adjust the balance of bass and treble output to your speakers or headphones.

Note

Tone Control is not effective when:

–the Pure Direct mode (see page 65) is selected.

–one of the THX Surround mode is selected (see page 87).

–MULTI CH is selected as the input source.

Control (Tone control)

Choice

Functions

 

 

Speaker

Adjust the bass/treble balance of your speakers.

 

 

Headphone

Adjust the bass/treble balance of your headphones.

 

 

y

“Speaker” and “Headphone” adjustments are stored independently. The adjustments for “Speaker” affects the front left/right, center, presence left/ right speaker channels and Subwoofer channel.

Graphical user interface (GUI) menu

Bass (Bass control)

Use this feature to adjust low-frequencies output to your speakers or headphones.

Choices: 125 Hz, 350 Hz, 500 Hz

Control range: – 6.0 dB to +6.0 dB

Initial setting: 0.0 dB

 

Speaker

Control

Freq.: 350Hz

Gain: 0.0dB

 

Bass

+6

 

Treble

0

Auto Bypass

-6

 

Treble (Treble control)

Use this feature to adjust high-frequencies output to your speakers or headphones.

Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz

Control range: – 6.0 dB to +6.0 dB

Initial setting: 0.0 dB

 

Control

Speaker

 

 

Bass

Freq.: 3.5kHz

 

Gain: 0.0dB

 

 

Treble

+6

 

0

 

Auto Bypass

 

 

 

 

-6

Auto Bypass (Auto bypass)

Use this feature to select whether the audio output bypasses the tone control circuitry when “Treble” and “Bass” are set to 0 dB (see page 65).

Choice

Functions

 

 

Auto

Automatically bypasses the tone control circuitry to

 

provide the purest signal possible when “Treble” and

 

“Bass” are set to 0 dB.

 

 

Off

Does not bypass the tone control circuitry.

 

 

■Lipsync(Audio and video synchronization)

Use this feature to adjust the audio and video synchronization.

HDMI Auto (HDMI automatic lip sync mode)

If the connected video monitor is connected to the HDMI OUT jack of this unit and compatible with the automatic audio and video synchronization function (automatic lip sync), this unit adjusts the audio and video synchronization automatically. Use this feature to activate or deactivate the automatic lip sync.

Choice

Descriptions

 

 

Off

Select this setting if the connected video monitor is

 

compatible with the automatic lip sync. Use “Auto” to

 

make fine adjustments of the audio and video

 

synchronization.

 

 

On

Select this setting if the video monitor is not compatible

 

with the automatic lip sync or you do not want to use the

 

automatic lip sync. Use “Manual” to adjustment the

 

audio and video synchronization.

 

 

Operation

Advanced

 

 

105 En