Remote control features

Example

Set the input source to DVD → Turn on the DVD player → Turn on the video monitor

Step 1 (“MCR1”): Press DVD.

Step 2 (“MCR2”): Press AV POWER.

Step 3 (“MCR3”): Press TV POWER.

(U.S.A. and Canada models)

POWER POWER STANDBY POWER

TV

AV

 

 

 

3

2

 

MULTI

V-AUX

PHONO

MD

TAPE

 

 

 

BD

DVD

CD

CD-R

HD DVD

 

1

 

CBL

 

 

DTV

DVR

VCR

SAT

 

 

 

TUNER

DOCK

NET

XM

USB

 

 

 

Indicates the number of macro

MCR 1 steps entered

M:DVD (Selected macro button)

Flashes alternately so you can set the next step

DVD (Selected control area)

Notes

•To change the selected input area, press 5SELECT l / h. Pressing the input selector buttons will program a macro step, whereas 5SELECT l/ honly changes the selected input area.

•The position of the operation mode selector (AMP/TV/SOURCE) affects the assigned function. When the operation mode selector is set to FAMP or FTV, the input source selectors do not function.

5Press HMACRO to confirm the program.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits from the macro programming mode.

6Press GSETUP again to exit from the setup mode.

Note

“ERROR” appears in the display window (B) if you press more than one button simultaneously.

Clearing configurations

You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID.

■Clearing function sets (CLEAR)

1Press GSETUP on the remote control using a ballpoint pen or similar object.

“SETUP” appears in the display window (4).

SETUP

2Press 9k / n repeatedly to select “CLEAR” and then press 9ENTER.

The remote control enters the clear mode. “CLEAR” and “L:the three-letter name of the selected control area” (for example, “L:DVD”) appears in the display window (4) alternately.

CLEAR L:DVD

3Press 9k / n repeatedly to select the desired clear mode.

Clear mode

Descriptions

 

 

L:DVD (etc.)

(L:Three-digit name of the selected control area) Clears all

 

learned functions the respective control area. You can

 

change the control area to be cleared by pressing the desired

 

input selector button (3) or 5SELECT l / h repeatedly.

 

 

L:AMP

Sets all learned functions for controlling the amplifier

 

functions to the initial factory settings. Set the operation

 

mode selector to FAMP to select this clear mode.

 

 

L:TV

Clears all learned functions for TV control area. Set the

 

operation mode selector to FTV to select this clear mode.

 

 

L:ALL

Clears all learned functions.

 

 

M:DVD (etc.)

(M:Name of the selected macro button) Clears the macro

 

programmed for the selected macro button (see page 129).

 

The assigned macro to the selected macro button reverts to

 

the initial factory macro. Press the desired macro button if

 

you want to change the macro button you want to clear the

 

programmed functions of.

 

 

M:ALL

Clears all programmed macros. The assigned macro to the

 

selected macro button reverts to the initial factory macro.

 

 

RNAME

Set all the name of the control areas to the default settings.

 

 

FCTRY

Set all settings of the remote control to the initial factory

 

settings.

 

 

4Press and hold 9ENTER for about 3 seconds.

When the clearing is successful, “OK” appears in the display window (4).

Notes

•“NG” appears in the display window (4) if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

130 En