1Press QTONE CONTROL on the front panel.
2Press MPROGRAM repeatedly to select the high- frequency response (TREBLE), the
3Rotate MPROGRAM to adjust the
Control range:
You can display the FM/AM radio, XM Satellite Radio (U.S.A. and Canada models only), or HD Radio tuning information in the Zone video monitor. You can also browse and select the iPod or network/ USB contents by using the Zone OSD.
1Set the operation mode selector to FSOURCE and then press the desired input selector button (3).
2Press KDISPLAY on the remote control to turn on the Zone OSD.
3Press 9k / n / l / h and 9ENTER repeatedly to navigate the menu on the Zone OSD.
TOP
PC/MCX | > |
NET RADIO | > |
USB | > |
Notes
•The OSD menu appears in English even if you set “LANGUAGE” to “JAPANESE” or “RUSSIAN” (see page 144).
•There are some characters that cannot be displayed in the front panel display or in the OSD of this unit. Those characters are replaced with underscores “_”.
•You can set the time for which the Zone OSD is displayed in the Zone video monitor by using “On Screen” in “Manual Setup” (see page 108).
y
Short message displays are also appears in the Zone video monitor. Use “Zone OSD” in “Manual Setup” to select that this unit displays the operational information of all zones or zone 2 only (see page 110).
Using
Use this feature to play the main zone sources in the other zones simultaneously. This feature is useful to play back a back ground music in multiple zone in a home party.
1 2
4 3
1,2,3 ··· In the party mode, this unit distributes the same sources to the zones which join the party mode.
4 ··· You can also operate the specific zone separately when this unit is in the party mode.
Turning on the party mode |
|
| |
|
| ||
|
|
|
|
Before performing the following operations, set the operation mode |
| Operation | Advanced |
selector on the remote control to FAMP. |
| ||
|
|
| |
|
|
|
|
|
|
|
|
Press CPARTY on the remote control to turn on the |
|
| |
party mode. |
|
| |
|
| ||
“PARTY MODE ON” appears in the front panel display and then |
|
| |
the main zone and the zones which join the party mode are turned |
|
| |
on. |
|
| |
Turning off the party mode |
|
| |
|
|
|
|
Press CPARTY again to turn off the party mode. |
|
| |
“PARTY MODE OFF” appears in the front panel display and then |
|
| |
the main zone and the zones that joins the party mode are turned off. |
|
| |
y |
|
| |
When this unit is in the party mode, the audio signals that is input at the |
|
| |
HDMI IN jacks or DIGITAL IN jacks are output at the ZONE OUT jacks. |
|
| |
Notes
•If you select “MULTI CH” as the input source, this unit does not output any sounds when this unit is in the party mode.
•When you change the input source of the zone that joins the party mode, the input source of the main zone also changes same as the operated zone.
•When this unit is in the party mode, no signals are not output at the OUT (REC) jacks.
Selecting the zones joining the party mode
You can select the zone that joins the party mode by using the “Party Mode Set” parameters. If a zone does not join the party mode, you can play back a source in the zone independently from the main zone. See page 109 for details.