Optimizing the speaker setting for your listening room (YPAO)
15Once the setting has been completed, press
9ENTER.
This unit starts the measurements of the speaker angles.
16Once the following display appears in the video monitor, move the optimizer microphone to the “(2)” position on the microphone base.
| 1 | |
|
| |
3 | 2 | |
17Press 9ENTER to resume the measurements.
18Once the following display appears in the video monitor, move the optimizer microphone to the “(3)” position on the microphone base.
| 1 | |
|
| |
3 | 2 | |
19Press 9ENTER to resume the measurements.
20Once the measurement procedure has been complete, following display appears in the video monitor.
See page 49 for details.
| ||
| ||
|
| ||
|
For other configuration of the listening position
The following examples indicate the measurement points when there is a listening position or are two listening positions.
Example 1: Two listening positions
We recommend that you make measurements in front of and behind the listening positions as well as the listening positions.
3
1
2
4
Example 2: One listening position
We recommend that you make measurements around the listening position as well as the listening position.
5
4
1
2
3