Graphical user interface (GUI) menu
■HDMI Aspect (HDMI aspect ratio)Use this feature to select whether this unit converts the aspect ratio of 4:3 video signals and outputs at the HDMI OUT jacks.
Choice | Functions |
|
|
Does not make any adjustments to the aspect ratio for the | |
| HDMI video signal sources. |
|
|
Displays video images with the aspect ratio of 4:3 on | |
| your video monitor with the aspect ratio of 16:9. Black |
| stripes appear on the right and left sides as a result. |
|
|
Fits video images with the aspect ratio of 4:3 to your | |
| video monitor with the aspect ratio of 16:9. The signals |
| are input with 720p, 1080i or 1080p of resolution, |
| this setting does not affect the video signals output at |
| the HDMI OUT jack. |
|
|
Notes
•When “HDMI Resolution” is set to “Through”, you cannot make any adjustments to “HDMI Aspect”.
•If the aspect ratio of the input video source is other than 4:3, this unit automatically ignores the setting of “HDMI Aspect”.
•When “HDMI Aspect” is set to “Smart Zoom”, the video images of the edge of the video monitor are rather stretched.
■Short Message (Short message display)Use this feature to activate or deactivate the short message display displayed in the main zone video monitor function.
Choice | Functions |
|
|
Activates the short message display function. | |
|
|
Deactivates the short message display function. | |
|
|
Note
The short message display does not appear in the following cases:
–when the component video signals with 720p, 1080i or 1080p resolutions are input
–when HDMI video signals are input
■On ScreenUse this feature to set the time for which the AM/FM tuning information, HD Radio information, XM Satellite Radio information, iPod menu, or NET/USB menu is displayed in the video monitor after you perform a certain operation.
Choice | Functions |
|
|
Displays the menu unceasingly during an operation. | |
|
|
Turns off the menu 10 seconds after you perform a | |
| certain operation. |
|
|
Turns off the menu 30 seconds after you perform a | |
| certain operation. |
|
|
y
This setting is applied to the GUI menu in the main zone and OSD in Zone 2, Zone 3, or Zone 4.
Use this feature to adjust the vertical and horizontal position of the GUI screen.
Control range:
|
|
| / :0 | / :0 |
| |
|
|
|
| |||
|
|
|
| |||
|
|
|
| + |
| |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Button | Moving direction of the GUI display |
9 k | Up |
|
|
9 n | Down |
|
|
9 h | Right |
|
|
9 l | Left |
|
|
Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input.
Choice | Functions |
|
|
Does not display any background in your video monitor. | |
|
|
Displays a background image (the photograph of a | |
| piano) in your monitor when there is no video signal |
| being input. |
|
|
Displays a background image (the photograph of a horn) | |
| in your monitor when there is no video signal being |
| input. |
|
|
Displays a background image (the photograph of an | |
| electric guitar) in your monitor when there is no video |
| signal being input. |
|
|
Display a gray background in your monitor when there | |
| is no video signal being input. |
|
|
Note
When “Conversion” is set to “Off”, no background is displayed even if “Wall Paper” is set to other than “None”.