Yamaha RX-Z11 152 En, ■iPod, ■Auto Setup

Troubleshooting

■iPod

Note

In case of a transmission error without a status message appearing in the front panel and in the video monitor, check the connection to your iPod (see page 38).

Status message	Cause	Remedy	See page
Loading...	This unit is in the middle of recognizing the
	connection with your iPod.
	This unit is in the middle of acquiring song lists
	from your iPod.
Connect error	There is a problem with the signal path from your	Turn off this unit and reconnect the Yamaha iPod universal	38
	iPod to this unit.	dock to the DOCK terminal of this unit.
		Try resetting your iPod.	—
Unknown iPod	The iPod being used is not supported by this unit.	Only iPod (Click and Wheel), iPod nano, and iPod mini are	—
		supported.
iPod connected	Your iPod is properly stationed in a Yamaha iPod
	universal dock (such as the YDS-10, sold
	separately) connected to the DOCK terminal of
	this unit, and the connection between your iPod
	and this unit is complete.
Disconnected	Your iPod was removed from a Yamaha iPod	Station your iPod back in a Yamaha iPod universal dock (such	38
	universal dock (such as YDS-10 sold separately)	as YDS-10 sold separately) connected to the DOCK terminal
	connected to the DOCK terminal of this unit.	of this unit.
Unable to play	This unit cannot play back the songs currently	Check that the songs currently stored on your iPod are	—
	stored on your iPod.	playable.
		Store some other playable music files on your iPod.	—

■Auto Setup

Before Auto Setup

Error message	Cause	Remedy	See page
Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone to the	47
		OPTIMIZER MIC jack on the front panel.
Unplug Phones!	Headphones are connected.	Unplug the headphones.	—
No Setup Menu!	No check items are selected as the measurement	Select the desired check item.	48
	items.
Memory Guard!	“Memory Guard” is set to “On”.	Set “Memory Guard” to “Off”.	113

152 En