Yamaha RX-Z11 113 En, setting), ■EXTD Surround, ■HDMI Set (HDMI settings), ■Memory Guard (Memory guard), ■Decoder Mode (Default decoder mode)

■Decoder Mode (Default decoder mode)

Use this feature to designate the default decoder mode (see page 97) for the input sources when you turn on the power of this unit.

Choice	Functions
Auto	Automatically detects the type of input signals and select
	the appropriate decoder mode setting.
Last	Automatically selects the last decoder mode setting used
	for the connected input source.

■EXTD Surround(Default extended surround decoder modesetting)

Use this feature to designate the extended surround decoder mode (see page 87) for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choice	Functions
Auto	Automatically detects the input digital audio signals and
	activates the appropriate decoder.
Last	Selects the last selected extended surround decoder
	mode.

■Memory Guard (Memory guard)

Use this feature to prevent accidental changes to sound field program parameter values and other system settings.

Choice		Functions
Off	Turns off the “Memory Guard” feature.
On	Protects the following parameters:
	– sound field program parameters
	–	GUI menu parameters
	–	speaker levels settings

y

When you select the protected parameter, “ ” appears at the bottom left of the GUI screen. You can adjust the parameters when you select the parameter and “ ” does not appear at the bottom left of the GUI menu even if “Memory Guard” is set to “On”.

■HDMI Set (HDMI settings)

Use this feature to adjust the HDMI support audio.

Support Audio (Support audio)

Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jacks on the rear panel of this unit.

Choice	Functions
RX-Z11	Plays back HDMI audio signals on this unit. The HDMI
	audio signals input at the HDMI input jacks of this unit
	are not output to the HDMI component connected to the
	HDMI OUT jacks on the rear panel of this unit.
Other	Plays back HDMI audio signals on another HDMI
	component connected to the HDMI OUT jacks.

Note

Available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component.

Graphical user interface (GUI) menu

Standby Through (Standby through)

Use this feature whether this unit allows the HDMI signals input at the HDMI IN jacks to pass thorough this unit when this unit is in the standby mode. You can also designate an HDMI IN jack and an HDMI OUT jack that accept the signals when “Standby Through” is set to “On” and this unit is in the standby mode.

Choice	Functions
Off	Does not accept the HDMI signals when this unit is in
	the standby mode.
On	Accepts the HDMI signals when this unit is in the
	standby mode.

Notes

•When “Standby Through” is set to “On” and this unit is in the standby mode, the audio signals are only output at the HDMI OUT 1 or HDMI OUT 2.

•When “Standby Through” is set to “On”, the amount of power consumption in the standby mode is increase.

Input/output jack select

When “Standby Through” is set to “On”, you can designate an HDMI IN jack and an HDMI OUT jack that accept the signals when this unit in in the standby mode.

Input (HDMI IN jack select)

Use this feature to select an HDMI IN jack select that accepts HDMI signals when this unit is in the standby mode.

Choice	Selected HDMI IN jack
IN1	HDMI IN1
IN2	HDMI IN2
IN3	HDMI IN3
IN4	HDMI IN4
FRONT	Front HDMI IN

Output (HDMI OUT jack select)

Use this feature to select an HDMI OUT jack select that outputs HDMI signals when this unit is in the standby mode.

Choice	Selected HDMI OUT jack
OUT 1	HDMI OUT1
OUT 2	HDMI OUT2

Operation Advanced

113 En