Using
3Perform the operations in the selected zone.
For further operations, refer to the following pages:
Descriptions | Page |
|
|
“Selecting the input source Zone 2, Zone 3, or Zone 4” | 140 |
|
|
“Adjusting the volume level of Zone 2, Zone 3, or Zone 4” | 140 |
|
|
“Adjusting the tonal quality of Zone 2, Zone 3, or Zone 4” | 141 |
|
|
y
To turn off the desired zone, press OZONE 2, OZONE 3, or
OZONE 4 again.
Remote control operations
1Press HZONE repeatedly to select the zone you want to control.
“MAIN”, “ZONE 2”, “ZONE 3”, or “ZONE 4” indicator appears in the display window (4) on the remote control.
ZONE 2 | ZONE 3 | ZONE 4 |
(Zone 2) | (Zone 3) | (Zone 4) |
MAIN
(Main zone)
2Press EPOWER to turn on the selected zone.
3Perform the operations in the selected zone.
For further operations, refer to the following pages:
Descriptions | Page |
|
|
“Selecting the input source Zone 2, Zone 3, or Zone 4” | 140 |
|
|
“Adjusting the volume level of Zone 2, Zone 3, or Zone 4” | 140 |
|
|
“Adjusting the tonal quality of Zone 2, Zone 3, or Zone 4” | 141 |
|
|
y
To turn off the desired zone, press DSTANDBY.
Operate the following operations after activating the Zone 2, Zone 3, or Zone 4 operation mode.
Rotate the DINPUT selector on the front panel (or set the operation mode selector to FAMP and then press one of the input selector buttons (3)) to select the input source of the selected zone.
•Select “TUNER” as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see “FM/AM tuning” on page 68.
•Select “XM” as the input source to use the XM Satellite Radio features in the selected zone. For details about the XM Satellite Radio operations, see “XM™ Satellite Radio tuning (U.S.A. and Canada models only)” on page 74.
•Select “DOCK” as the input source to use the iPod features in the selected zone. For details about the iPod operations, see “Using iPod™” on page 78.
•Select “NET/USB” as the input source to use the network/USB operations features in the selected zone. For details about the iPod operations, see “Using Network/USB features” on page 80.
Notes
•The selected input sources are shared across all zones.
•If you set the recording source other than “SOURCE” (see page 66), the input source of Zone 2 is fixed to the source you set as the recording source.
■Adjusting the volume level of Zone 2, Zone 3, or Zone 4Rotate EVOLUME on the front panel (or press JVOLUME
selected zone.
y
Press LMUTE on the remote control to mute the sound output to the selected zone.
Note
When you use the external amplifiers in Zone 2 or Zone 3, JVOLUME +/– can be used only when “Zone2 Volume”, “Zone3 Volume”, or “Zone4 Volume” is set to “Variable” in “Zone2 Set”, “Zone3 Set”, or “Zone4 Set” (see page 109).
■Setting the sleep timer for Zone 2, Zone 3, orZone 4Use this feature to turn off the desired zone to the standby mode after a contain amount of time.
Set the operation mode selector to FAMP on the remote control and then press CSLEEP repeatedly to set the
amount of time.
Each time you press CSLEEP, the sleep timer setting changes as shown below.