Connections

Connecting other components

Make sure that this unit and other components are unplugged from the AC wall outlets.

Notes

When “Conversion” is set to “Off” (see page 107), be sure to make the same type of video connections as those made for your TV (see page 31). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.

When “Conversion” is set to “On” (see page 107), the converted video signals are output only at the MONITOR OUT jacks. When recording a source, you must make the same type of video connections between each component.

To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL OUTPUT jack, select the corresponding setting for “Optical Input”, “Optical Output”, or “Coaxial Input” in “I/O Assignment” (see page 96).

If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.

Connecting a Blu-ray Disc or HD DVD player

Connect your Blu-ray Disc or HD DVD player to the HDMI IN1 jack of this unit to perform the features of the Blu-ray Disc or HD DVD completely.

Blu-ray Disc or

HD DVD player

Component out

Coaxial out

HDMI out

Y PBPR

C

HDMI

IN1

BD/HD DVD

COMPONENT VIDEO

Y PB PR

BD/

HD DVD

A

BD/

6

HD DVD

 

7

COAXIAL

DIGITAL IN

(U.S.A. model)

indicates recommended connections

indicates alternative connections

32 En