■1 Source Voice Memory

Select the Voice Memory containing the Voice (source) from which you will copy parameter settings.

❏Settings: PRE1/2 (Preset 1/2), INT (Internal Normal), EXT (External Normal), PLG (Plug-in), PRE (Preset Drum), INT (Internal Drum), EXT (External Drum)

■2 Source Voice Number

Select the Voice Number of the source Voice. The Voice Name is shown in the top line of the display.

❏Settings: 001 ~ 128 (for Preset/Internal/External Normal), 1 ~ 64 (for Plug-in), DR1 ~ DR8 (for Preset Drum), DR1 ~ DR2 (for Internal/External Drum)

■3 Source Voice Parameter

Select the parameter of the source Voice. You can copy parameter settings common to all Elements or those used by individual Elements.

❏Settings: normal Voice:

Common (all Elements), EL1 ~ EL4

Drum Voice:

Common (all Drum Keys), C0 ~ C6

Plug-in Voice: Common, EL (Element)

If the parameters of the source Voice (Normal/Drum/Plug-in) differ from those of the Voice you are currently editing (destination), you will only be able to copy Common parameters.

■4 Destination Element/Drum Key

Set the Element/Drum Key of the destination Voice. If the source is a Normal or Drum Voice, you can only choose a destination if the Element/Drum Key has been set.

❏Settings: normal Voice: EL1 ~ EL4

Drum Voice: C0 ~ C6

If you choose to copy Common parameters from the source, this screen will change to “Common.”

VCE Bulk Dump

You can send all the parameter settings for the current Voice to your computer or some other external MIDI device using Bulk Dump.

 

 

 

 

 

VCE

Bulk Dump)

￿

 

Job

Current Voice

 

 

 

 

 

You must set the correct MIDI Device Number in order to perform a Bulk Dump. Details are given on Page 130.

Voice Store

You can store (save) the parameter settings for up to 128 Voices to each of your synthesizer’s Memories (INT: Internal) or to its Memory Card (EXT: External). The procedure is as follows.

Up to 64 plug-in vioces can be stored in Banks A to D of PLG.

When you perform this, the settings for the destination Voice will be overwritten. Important data should always be backed up to computer, a separate Memory Card or some other storage device.

1Press the [STORE] key after editing a Voice. You will see the Voice Store screen.

 

 

 

 

 

VCE’

[Pf:GrandPiano] >[Pf:Init Voice]

￿

 

Store

EXT:128(H16)

 

 

 

 

 

2Use Knob [1] to select the destination Voice Memory (INT or EXT).

This is fixed to PLG when storing a Plug-in Voice.

3Use Knob [2] to select the destination Voice Number This will set the Voice Memory/Number to which your Voice will be stored.

You can also use the [DATA] knob or [DEC/NO] and [INC/YES] keys to perform this operation.

4When you press the [ENTER] key, you will be prompted for confirmation.

 

 

 

 

 

 

VCE’

[Pf:GrandPiano] >[Pf:Init

Voice]

￿

 

<<

Are You sure? [YES]/[NO]

>>

 

 

 

 

 

 

5Press the [INC/YES] key to confirm. The message “Executing…” will be displayed while the Job is being processed. When it has completed, you will see the message “Completed.” and you will be returned to Voice Play Mode.

You can press the [DEC/NO] key to cancel the Job. This will return you to the original screen.

Voice Mode

101