Long Delay
Key on
■InsEF (Insertion Effect)
Set the Insertion Effect to which the output signal from each Element is sent. The Insertion Effect is bypassed if you select Thru.
❏Settings: thru, ins1 (Insertion Effect 1), ins2 (Insertion Effect 2)
OSC Pan (Oscillator Pan)
You can set the following Pan parameters for each Element in the Voice.
|
|
|
|
|
|
|
| OSC’Pan) | Pan | Alter | Random | Scale | |
| EL1234 | C | L64 | 63 | +63 |
|
|
|
|
|
|
|
|
■Pan
Set the stereo Pan position for each Element (Wave). This will also be used as the basic Pan position for the Alternate, Random and Scale settings.
❏Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
■Alter (Alternate)
Set the amount by which the sound is panned alternately left and right for each note you press. The Pan setting is used as the basic Pan position.
❏Settings: L64 ~ 0 ~ R63
■Random
Set the amount by which the sound is panned randomly left and right for each note you press. The Pan setting is used as the basic Pan position.
❏Settings: 0 ~ 127
■Scale
Set the amount by which the sound is panned left and right according to the position of the note on the keyboard. The Pan setting is used as the basic Pan position at note C3.
❏Settings:
OSC Limit (Oscillator Limit)
You can set parameters controlling the note range of each Element and the velocity.
|
|
|
|
|
| OSC’Limit) | Note Limit | Vel Limit | |
| EL1234 | 1 - 127 |
| |
|
|
|
|
|
■Note Limit
Set the lowest and highest notes of the keyboard range for each Element. Each Element will only sound for notes played within its specified range.
❏ Settings:
If you specify the highest note first and the lowest note second, for example “C5 to C4,” then the note range covered will be
You can set the lowest and highest notes in the range by pressing notes on the keyboard while holding down the [SHIFT] key.
■Vel Limit (Velocity Limit)
Set the minimum and maximum values of the velocity range within which each Element will respond. Each Element will only sound for notes played within its specified velocity range.
❏ Settings: 1 ~ 127 (for the minimum and maximum values)
If you specify the maximum value first and the minimum value second, for example “93 to 34,” then the velocity range covered will be “1 to 34” and “93 to 127.”
Element Pitch
You can set parameters governing the pitch of each Element. The Pitch Envelope Generator (PEG) controls the change in pitch from the moment a note is pressed on the keyboard to the point at which the sound has faded out completely. The following six screens are available.
PCH Tune (Pitch Tune)
PEG VelSens (PEG Velocity Sensitivity)
PEG Time (PEG Time)
PEG Level (PEG Level)
PEG Release (PEG Release)
PCH Scale (Pitch Scale)
PCH Tune (Pitch Tune)
You can set the tuning parameters and the effectiveness of the Envelope Generator (EG) for each Element.
|
|
|
|
|
|
|
| PCH’Tune)EGDepth | Coarse | Fine | Random | ||
| EL1234 | +63 | + 0 | + 0 | +7 |
|
|
|
|
|
|
|
|
■EGDepth
Set the amount of change applied by the PEG. A setting of zero means the original pitch is not changed.
❏ Settings:
Voice Mode
75