FEG Time
You can set various Time parameters for the Filter Envelope Generator (FEG). Combined with the FEG Level and FEG Release settings, these can be used control the change in sound from the moment a note is pressed on the keyboard to the moment it is released. You can set different values for each Element.
FEG’Time) Hold Attack Decay1 Decay2
EL1234 127 127 127 127
■Hold (Hold Time) Set the Hold Time.
❏Settings: 0 ~ 127
■Attack (Attack Time) Set the Attack Time.
❏Settings: 0 ~ 127
■Decay1 (Decay 1 Time) Set the Decay 1 Time.
❏Settings: 0 ~ 127
■Decay2 (Decay 2 Time) Set the Decay 2 Time.
❏Settings: 0 ~ 127
FEG Level
You can set a Level parameter for the Filter Envelope Generator (FEG). Combined with the FEG Time and FEG Release settings, these can be used control the change in sound from the moment a note is pressed on the keyboard to the moment it is released. You can set different values for each Element.
FEG’Level) Hold Attack Decay1 Sustain
EL1234 +127
■Hold (Hold Level) Set the Hold Level.
❏Settings:
■Attack (Attack Level) Set the Attack Level.
❏Settings:
■Decay1 (Decay 1 Level) Set the Decay 1 Level.
❏Settings:
■Sustain (Sustain Level) Set the Sustain Level.
❏Settings:
FEG Release
You can set Release Time and Release Level parameters for the Filter Envelope Generator (FEG). Combined with the FEG Time and FEG Level settings, these can be used control the change in sound from the moment a note is released.
|
|
|
|
|
| FEG’Release) | Time | Level | |
| EL1234 | 127 | +127 |
|
|
|
|
|
|
■Time (Release Time) Set the Release Time.
❏Settings: 0 ~ 127
■Level (Release Level) Set the Release Level.
❏Settings:
Filter Envelope Generator Settings
There are five Time settings (controlling the speed of changes to the sound) and five Level settings (controlling the amount of filtering applied). The tone of a note is held at the Hold Level for the length of time defined by the Hold Time. After the Hold Time has elapsed, the tone changes in accordance with the Attack Time/Level, Decay 1/2 Time and the Decay 1 Level, then settles at the Sustain Level. When the note is released, the change in tone is governed by the Release Time/Level settings.
Velocity Sensitivity and other parameters can also be set if required.
Level | Attack | Decay1 | Sustain |
| Release |
|
| ||||
| Level | Level | Level | Key off | Level |
Hold Level
0 |
|
|
| Time |
|
|
|
| |
Hold | Attack | Decay1 | Decay2 | Release |
Time | Time | Time | Time | Time |
FLT KeyFlw (Filter Key Follow)
You can set Filter Key Follow parameters for each Element. This parameter controls the Filter Cutoff and FEG behavior according to the position of the notes played on the keyboard.
The availability of the Filter Key Follow parameter depends on the Break Point and Offset settings in the FLT Scale screen.
|
|
|
|
|
|
|
| ||||||
| EL1234 | +200% | (C 3) | 63 | C 3 |
|
|
|
|
|
|
|
|
Voice Mode
81