Controlling Parameters by Foot Controller
By connecting an optional Foot Controller (such as the FC7) to the FOOT CONTROLLER jack on the rear panel of the synthesizer, you can control various parameters by foot without having to use your hands. In the following example, we introduce how to set up Foot Controller to work as Modulation Wheel.
| MIDI |
| HOST SELECT |
| FOOT | FOOT |
| OUTPUT | STANDBY | |||||||||
|
|
|
|
|
|
|
|
|
| |||||||||
THRU | OUT | IN | TO HOST | R | L/MONO PHONES DC IN | |||||||||||||
MIDI Mac | SWITCH CONTROLLER | ON | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FC7
1Press the [UTILITY] key to enter Utility Mode.
MODE
VOICE 
PERFORM STORE
UTILITY CARD SEQ
PLAY
EDIT | JOB | PLAY/ | |
STOP | |||
|
| ||
COMPARE |
|
| |
|
|
| |
|
|
|
2Use the [PAGE] knob to switch to the CTRL Assign2 (Voice Control Assign 2) screen.
|
| CTRL Assign2) |
| FC | RB |
| |
|
| Vce | [ off | ] | 00 | 22 |
|
SHIFT | PAGE | A | B | C | 1 | 2 | DATA |
PART/ELEMENT
43
3Use Knob [C] to select “01:ModWheel” (Modulation Wheel).
|
| CTRL Assign2) |
| FC | RB |
| |
|
| Vce | [ModWheel] |
| 01 | 22 |
|
SHIFT | PAGE | A | B | C | 1 | 2 | DATA |
PART/ELEMENT
In Voice Mode, the foot controller can now be used to control the same function as that assigned to the Modulation Wheel.
If the current Voice has a Control Set with a source (Src) assigned to Modulation Wheel (MW) and receives a Control Change message of Modulation Wheel, a destination (Dest) parameter for the source (MW) will be affected with that message.
The above procedure explains how to set up the Foot Control to control Modulation in Voice Mode. To create such a setup for Performance Mode, the appropriate settings are found at the CTL Assign2 screen in Performance Edit Mode.
Switching Between Programs by Foot Switch
By connecting an optional Foot Switch (such as the FC4 or FC5) to the FOOT SWITCH jack on the rear panel of the synthesizer, you can switch between Programs without having to use your hands. For example, if you consecutively arrange the Voices/Performances in memory, you can switch between them easily in a live performance. The following procedure explains exactly how to a about this.
| MIDI |
| HOST SELECT |
| FOOT | FOOT |
| OUTPUT | STANDBY | |||||
|
|
|
|
|
|
|
| |||||||
THRU | OUT | IN | TO HOST | R | L/MONO PHONES DC IN | |||||||||
MIDI Mac | SWITCH CONTROLLER | ON | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FC4 or FC5
Basics Section