Mode Utility

■Vel (Keyboard Velocity Curve)

Set the Velocity Curve determining how the strength of the notes played will affect the sound output.

❏ Settings: norm, soft, hard, wide, fixed

norm (Normal)

The velocity is in proportion to the strength.

Volume

Keyboard Playing Strength

soft

A softer playing style increases the volume level.

Volume

Keyboard Playing Strength

hard

A stronger playing style increases the volume level.

Volume

Keyboard Playing Strength

wide

A softer playing style lowers the volume level and a stronger playing style increases the volume level. As a result, you feel a wider dynamic range.

Volume

Keyboard Playing Strength

fixed

Select this curve when you want the tone generator to respond (sound) in a specific volume, tone or the like. With this setting, any velocity value will be changed into a fixed one you specify with the Fixed (Keyboard Fixed Velocity) parameter below.

Volume

Keyboard Playing Strength

■Fixed (Keyboard Fixed Velocity)

The velocity is fixed at the Vel setting. The sound output is always the same, regardless of how hard or gently you play the keyboard. The Vel parameter is only available if you select the “fixed” Velocity Curve.

❏ Settings: 1 ~ 127 (Only available if Vel is set to “fixed” )

MSTR EF Bypass (Master Effect By-pass)

Set the parameters related to the [EF BYPASS] key on the front panel.

MSTR EF Bypass)

Insert

Reverb

Chorus￿

Sys

off

on

on

 

 

 

 

■Insert (Insertion), Reverb, Chorus

When the [EF BYPASS] key is pressed (its LED is lit), various effects can be bypassed.

❏Settings: off, on (for Insert (Insertion), Reverb and Chorus effects)

Plug-in Board Variations (Variation Effects) will be bypassed according to the Insert setting.

MSTR Other (Other Setup)

Set other parameters common throughout the system.

 

 

 

 

 

 

 

MSTR Other) PowerOnMode

Ctrl

BCCurve

￿

 

Sys

Voice(INT)

hold

thru

 

 

 

 

 

 

 

■PowerOnMode

Select the Mode entered when you switch the synthesizer on.

❏Settings:

Performance:

Performance Play Mode is entered and the first Program Number (INT: 001) is selected automatically.

Voice (INT):

Voice Play Mode is entered and the first Program Number of the Internal Memory (INT: 001) is selected automatically.

Quick Access:

Voice Play Mode is entered with Quick Access enabled, and the first Program Number (A.PIANO) is automatically selected.

last:

The Voice/Performance Program selected before you switched the power off is recalled.

■Ctrl (Controller)

Select whether or not the controller (Modulation Wheel, Aftertouch, Foot Controller, Knobs) state/position is maintained (hold) or reset when you switch between Voices.

❏Settings: hold, reset

If you select “reset,” the controllers will be reset to the following states/positions:

Pitch Bend ....................Center Modulation Wheel ........Minimum Aftertouch ....................Minimum Foot Controller ..............Maximum Foot Switch....................Off

128