Plug-in Common Controller

You can set Pitch Bend Wheel, Modulation Wheel and other Controller parameters for the Plug-in Voices in the following nine screens.

CTL Pitch (Pitch Bend)

CTL Set1 (Control Set 1)

CTL Set2 (Control Set 2)

CTL MW Control (MW Control Depth)

CTL MW Modulation (MW Modulation Depth) CTL AT Control (AT Control Depth)

CTL AT Modulation (AT Modulation Depth) CTL AC Control (AC Control Depth)

CTL AC Modulation (AC Modulation Depth)

CTL Pitch (Pitch Bend)

You can set the Pitch Bend Range and Portamento for the Plug-in Voice here. Portamento creates a smooth transition from the pitch of the first note played to the pitch of the next.

 

 

 

 

 

 

 

CTL’Pitch)

Pitch Bend

Portamento Time

￿

 

Common

-24

on

127

 

 

 

 

 

 

 

■Pitch Bend

Set the amount (in semitones) by which the pitch of the note is varied when you move the Pitch Bend Wheel up/down. For example, if you set a value of +12, the pitch will change up by up to an octave when you move the wheel up. Conversely, if you set a negative value, the pitch falls when you move the wheel down.

❏Settings: -24 ~ 0 ~ +24

■Portamento

Switch Portamento on or off.

❏Settings: off, on

■Time

Set the Portamento Time, which is the speed of the transition in pitch from the first note to the next.

❏Settings: 0 ~ 127

CTL Set1 (Control Set 1)

CTL Set2 (Control Set 2)

These parameters are the same as for Normal Voices. Details are given on Page 69 (The Elem SW parameter is only available for Normal Voices).

CTL MW Control (MW Control Depth)

Here, you can set the depth of control the Modulation Wheel has over the filter.

 

 

 

 

 

 

CTL’MW

Control)

Filter

￿

 

Common

 

-64

 

 

 

 

 

 

■Filter

Set the depth of control of the Modulation Wheel over the filter cutoff frequency.

❏ Settings: -64 ~ 0 ~ +63

CTL MW Modulation (MW Modulation Depth)

Here, you can set the depth of control the Modulation Wheel has over the pitch, filter and amplitude modulation of the Plug-in Voice.

 

 

 

 

 

 

 

CTL’MW

Modulation) PMod

FMod

AMod

￿

 

Common

127

127

127

 

 

 

 

 

 

 

■PMod (Pitch Modulation Depth)

Set the depth of control the Modulation Wheel has over the pitch modulation. The larger the setting, the greater the depth of control.

❏Settings: 0 ~ 127

■FMod (Filter Modulation Depth)

Set the depth of control the Modulation Wheel has over the filter cutoff modulation. The larger the setting, the greater the depth of control.

❏Settings: 0 ~ 127

■AMod (Amplitude Modulation Depth)

Set the depth of control the Modulation Wheel has over the amplitude modulation. The larger the setting, the greater the depth of control.

❏Settings: 0 ~ 127

CTL AT Control (AT Control Depth)

Here, you can set the depth of control keyboard aftertouch has over the pitch and filter of the Plug-in Voice.

 

 

 

 

 

 

 

CTL’AT

Control)

Pitch

Filter

 

 

Common

 

+24

-64

 

 

 

 

 

 

 

■Pitch

Set the depth of control of keyboard aftertouch over the pitch. You can set a value (in semitones) of up to two octaves.

❏Settings: -24 ~ 0 ~ +24

■Filter

Set the depth of control of keyboard aftertouch over the filter cutoff frequency.

❏Settings: -64 ~ 0 ~ +63

Voice Mode

95