Vel Limit

Set the minimum and maximum values of the velocity range within which each Part will respond. Each Part will only sound for notes played within its specified velocity range.

Settings: 1 ~ 127 (for the minimum and maximum values)

If you specify the maximum value first and the minimum value second, for example “93 to 34,” then the velocity range covered will be “1 to 34” and “93 to 127.”

Part Receive Switch

Each Part can be set to receive Control Change and Program Change messages. The following four screens are available.

RCV Sw1 (Receive Switch 1)

RCV Sw2 (Receive Switch 2)

RCV Sw3 (Receive Switch 3)

RCV Sw4 (Receive Switch 4)

Mode Performance

LYR Tune (Layer Tune)

You can set note shift and tuning parameters for each Part.

 

 

 

 

 

 

LYR’Tune)

NoteShift

Detune

￿

 

Part01

+24

+12.7

 

 

 

 

 

 

NoteShift

Adjust the pitch of each Part in semitones.

Settings: -24 ~ +24

Detune

Offset (detune) the pitch of each Part by a very small amount.

Settings: -12.8Hz ~ +12.7Hz

RCV Sw1 (Receive Switch 1)

When set to “on,” each Voice in each Part will receive Control Settings (PB, MW, RB,AT) and Control Change messages. The Controller parameters will vary according to the Part selected.

Parts 1 to 16

Drum Voice Part

 

 

 

 

 

 

 

 

RCV’Sw1)

PB

MW

RB

AT

￿

 

Part01

on

off

on

off

 

 

 

 

 

 

 

 

Plug-in Part

Multi Plug-in Part

 

 

 

 

 

 

 

RCV’Sw1)

PB

MW

AT

￿

 

PartPL

on

off

off

 

 

 

 

 

 

 

Settings:

PB (Pitch Bend Wheel): off, on

MW (Modulation Wheel): off, on

RB (Ribbon Controller): off, on

AT (Aftertouch): off, on

RCV Sw2 (Receive Switch 2)

When set to “on,” each Voice in each Part will receive messages from Knob [1]/[2], plus Breath Controller, Foot Controller and Control Change messages.

This screen is only available for Parts 1 to 16 (including Drum Voice Parts).

Parts 1 to 16

Drum Voice Part

 

 

 

 

 

 

 

 

RCV’Sw2)

Knob1

Knob2

BC

FC

￿

 

Part01

on

off

on

off

 

 

 

 

 

 

 

 

Settings:

Knob1 (Knob [1]): off, on

Knob2 (Knob [2]): off, on

BC (Breath Controller): off, on

FC (Foot Controller): off, on

118