■Time (Release Time) Set the Release Time.

❏Settings: 0 ~ 127

■Level (Release Level) Set the Release Level.

❏Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents)

Pitch Envelope Generator Settings

There are five Time settings (controlling the speed of changes to the sound) and five Level settings (controlling the pitch). The pitch of a note is held at the Hold Level for the length of time defined by the Hold Time. After the Hold Time has elapsed, the pitch changes in accordance with the Attack Time/Level, Decay 1/2 Time and the Decay 1 Level, then settles at the Sustain Level. When the note is released, the change in pitch is governed by the Release Time/Level settings.

Velocity Sensitivity and other parameters can also be set if required.

 

 

Attack

Decay1

Sustain

 

Release

 

 

 

 

 

Level

Level

Level

Key off

Level

Pitch

Hold Level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hold

Attack

Decay1

Decay2

Release

 

Time

Time

Time

Time

 

Time

PCH Scale (Pitch Scale)

You can set the Pitch Scaling for each Element. Pitch Scaling is used to vary the Element pitch, PEG Levels and PEG Times according to the positions of the notes

■Center (Center Key)

Set the basic pitch used by the Pitch parameter.

❏ Settings: C-2 ~ G8

You can also set this parameter by pressing the respective note on the keyboard while holding down the [SHIFT] key.

 

 

 

 

 

Large

 

Speed of

 

 

 

+

 

 

 

pitch change

 

 

 

 

 

 

 

 

Small

 

 

 

 

 

 

 

 

 

 

 

—

 

 

Lower range

 

Center (Basic Pitch)

Higher range

 

■EGTime

The EGTime parameter controls the PEG Times for each Element according to the positions of the notes on the keyboard. The Center parameter is used as the basic pitch for this parameter.

A positive setting will cause the pitch of lower notes to change slower and that of higher notes to change faster. Negative values will have the opposite effect.

❏Settings: -64 ~ 0 ~ +63

■Center (Center Key)

Set the basic pitch used by the EGTime parameter. When the Center Key note is played, the PEG behaves according to its actual settings. The pitch change characteristics for other notes will vary in proportion to the EGTime settings.

❏Settings: C-2 ~ G8

You can also set this parameter by pressing the respective note on the keyboard while holding down the [SHIFT] key.

Voice Mode

on the keyboard.

Positive value

Speed of PEG pitch change

+

PCH’KeyFlw)Pitch-Center

EGTime--Center

￿

EL1234

100%

C 3

+7

C 3

 

■Pitch

Adjust the sensitivity of the Pitch Scaling for each Element according to the position of the note on the keyboard. The Center parameter is used as the basic pitch for this parameter.

A positive setting will cause the pitch of lower notes to change less and that of higher notes to change more. Negative values will have the opposite effect.

❏Settings: -200% ~ 0 ~ +200% (At +100%, neighboring notes are pitched one semitone (100 cents) apart.)

Lower range Higher range

–

Basic pitch

Negative value

+

Speed of PEG

 

 

pitch change

 

 

Lower range Higher range

–

Basic pitch

77