■Delay

Set the delay time between the moment you press a note on the keyboard and the moment the LFO comes into effect. As shown in the illustration, a positive setting will lengthen the delay and a negative setting will shorten it.

❏Settings: -64 ~ 0 ~ +63

Short Delay

Key on

Long Delay

Key on

■PMod (Pitch Modulation Depth)

Set the amount by which the LFO waveform controls the pitch. A positive setting will increase the amount and a negative value will decrease it.

❏ Settings: -64 ~ 0 ~ +63

Plug-in Common Effect

In the following three screens, you can set the parameters for the Insertion and System Effects used by the Plug-in Voice. The parameters are the same as for Normal Voices. The EFF EF1 (Insertion Effect) parameter is the same as the EFF EF1 (Insertion Effect

1)parameter of the Normal Voices. Details are given on Page 73.

EFF EF1 (Insertion Effect)

EFF Rev (Reverb)

EFF Cho (Chorus)

OSC Assign (Oscillator Assign)

You can select the Board Voice that make up the Element in a Plug-in Voice. Use Knob [C] to select the Bank and Knob [1] to select the Board Voice.

 

 

 

 

 

 

OSC’Assign)

Bank

Number

￿

 

Elem

NORM/001

128[GndPiano]

 

 

 

 

 

 

■Bank

Select the Board Voice Bank of the Plug-in Voice.

❏Settings: (Depends on the Plug-in Board. Refer to the Owner’s Manual for your Plug-in Board.)

■Number

Select the Board Voice Number. The Board Voice Name is displayed to the right of this number.

❏Settings: (Depends on the Plug-in Board. Refer to the Owner’s Manual for your Plug-in Board.)

OSC Velocity (Oscillator Velocity)

Here, you can set the velocity and note shift for the Board Voice.

 

 

 

 

 

 

 

OSC’Velocity)

Depth

Offset

NoteSft

￿

 

Elem

127

0

-24

 

 

 

 

 

 

 

■Depth

Set the velocity sensitivity of the Board Voice. If you set a larger value, the volume increase will be greater the harder you play the keyboard.

❏Settings: 0 ~ 127

■Offset

Set an offset value for the velocity sensitivity of the Board Voice. When you press a note on the keyboard, this offset value is added to the note velocity.

❏Settings: 0 ~ 127

■NoteSft (Note Shift)

Set the amount (in semitones) by which the pitch of the Board Voice is shifted. You can set a value of up to 2 octaves.

❏Settings: -24 ~ 0 ~ +24

Voice Mode

Plug-in Element OSC (Oscillator)

Here, you can set the Element-related parameters for the Plug-in Voice. In the following two screens, you can select the Element’s waveform, then it’s velocity parameters.

OSC Assign (Oscillator Assign)

OSC Velocity (Oscillator Velocity)

Plug-in Element Pitch

You can set the Pitch Envelope Generator parameters for the Board Voice. The Pitch Envelope Generator controls the change in pitch from the moment a note is pressed on the keyboard to the moment it is released.

97