Mode Performance
2Source Performance Number
Select the Performance Number of the source Performance. The Performance Name is shown in the top line of the display.
❏ Settings: 001 ~ 128 (INT), 001 ~ 064(EXT)
When copying, you can set the current Performance number (destination) for the source Performance number. In this case, if you have edited several settings of the current Performance, you will copy those recent settings, not stored ones (before editing). Therefore, you can edit a Part and copy all edits to another Part.
3Source Performance Part
Select the Part of the source Performance.
❏ Settings: Part01 to Part16, PartPL
4Destination Part
Set the Part of the destination Performance.
❏Settings: Part01 to Part16, Arp (Arpeggio), Effect, PartPL
If you choose Arp (Arpeggio) or Effect, the Arpeggio and Effect settings for the Voice assigned to the source Part will be copied.
PFM Bulk Dump
You can send all the parameter settings for the current Performance to your computer or some other external MIDI device using Bulk Dump.
|
|
|
|
| PFM | Bulk Dump) | |
| Job | Current Perform |
|
|
|
|
|
Performance Store
You can store the parameter settings for up to 128 Performances to each of your synthesizer’s Memories (INT: Internal) or up to 64 Performances to Memory Card (EXT: External). The procedure is as follows.
When you execute this, the settings for the destination Performance will be overwritten. Important data should always be backed up to computer, a separate Memory Card or some other storage device.
1Press the [STORE] key after editing a Performance. You will see the Performance Store display.
|
|
|
|
| PFM’ | [Pf:GrandPiano] >[Pf:Init Perf ] | |
| Store | INT:128(H16) |
|
|
|
|
|
2Use Knob [1] to select the destination Performance Memory (INT or EXT).
3Use Knob [2] to select the destination Performance Number.
This will set the Performance Memory/Number to which your Performance will be stored.
You can also use the [DATA] knob or [DEC/NO] and [INC/YES] keys to execute this operation.
4When you press the [ENTER] key, you will be prompted for confirmation.
|
|
|
|
|
|
| PFM’ | [Pf:GrandPiano] >[Pf:Init | Perf | ] | |
| << | Are you sure? [YES]/[NO] | >> |
|
|
|
|
|
|
|
|
You must set the correct MIDI Device Number in order to execute a Bulk Dump. Details are given on Page 130.
5Press the [INC/YES] key to confirm. The message “Executing…” will be displayed while the Job is being processed. When it has completed, you will see the message “Completed.” and you will be returned to Performance Play Mode.
You can press the [DEC/NO] key to cancel the Job. This will return you to the original screen.
124